1.1 This provisional specification covers low sulfur biodiesel (B100) for use as a blend component with diesel fuel oils defined by Specification D975 Grades 1-D, 2-D, and low sulfur 1-D and 2-D. 1.2 This specification, unless otherwise provided by agreement between the purchaser and the supplier, prescribes the required properties of biodiesel fuel at the time and place of delivery. 1.3 Nothing in this specification shall preclude observance of federal, state, or local regulations which may be more restrictive. Note 1-the generation and dissipation of static electricity can create problems in the handling of distillate fuel oils with which biodiesel may be blended. For more information on the subject, see Guide D4865.
ASTM PS121-99 Referenced Document
ASTM D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D130 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test
ASTM D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D2500 Standard Test Method for Cloud Point of Petroleum Products
ASTM D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D3117 Standard Test Method for Wax Appearance Point of Distillate Fuels
ASTM D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D3242 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D4294 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)*, 2020-05-01 Update
ASTM D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives*, 2023-03-01 Update
ASTM D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D975 Standard Specification for Diesel Fuel Oils
ASTM D976 Standard Test Methods for Calculated Cetane Index of Distillate Fuels
ASTM PS121-99 history
2017ASTM PS121-99 Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels