SAE AMS2468G-1999
Hard Anodic Coating Treatment of Aluminum Alloys
- Standard No.
- SAE AMS2468G-1999
- Release Date
- 1999
- Published By
- SAE - SAE International
- Status
- 1999-09
- Latest
- SAE AMS2468G-1999
- Scope
- Purpose: This specification establishes the engineering requirements for producing a hard coating on aluminum alloys and the properties of such coating. Application: This coating has been used typically to increase@ by the formation of a dense aluminum oxide@ surface hardness and resistance to abrasion and corrosion of aluminum-alloy parts containing@ in general@ less than 6% copper or 8% silicon or a total of 8% of both@ but usage is not limited to such applications. Alloys with higher silicon content alone can be coated satisfactorily with proper precautions in processing. Careful consideration should be given to the use of this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
SAE AMS2468G-1999 history
- 1999 SAE AMS2468G-1999 Hard Anodic Coating Treatment of Aluminum Alloys
- 1998 SAE AMS2468F-1998 Hard Anodic Coating Treatment of Aluminum Alloys
- 1992 SAE AMS2468E-1992 Hard Coating Treatment of Aluminum Alloys
- 1991 SAE AMS2468D-1991 Hard Anodic Coating Treatment of Aluminum Alloys
- 1986 SAE AMS2468D-1986 Hard Coating Treatment of Aluminum Alloys
- 1980 SAE AMS2468C-1980 HARD COATING TREATMENT OF ALUMINUM ALLOYS
- 1976 SAE AMS2468B-1976 HARD COATING TREATMENT OF ALUMINUM ALLOYS
- 1964 SAE AMS2468A-1964 HARD COATING TREATMENT OF ALUMINUM ALLOYS
- 1957 SAE AMS2468-1957 HARD COATING TREATMENT OF ALUMINUM ALLOYS
