ASTM C497M-17
Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

Standard No.

ASTM C497M-17

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM C497M-18

Latest

ASTM C497M-20a

Scope

1.1 These test methods cover testing of concrete pipe, manhole sections, and tile. The test methods described are used in production testing and acceptance testing to evaluate the properties provided for in the specifications. 1.2 The test methods appear in the following order: Section External Load Crushing Strength 4 Flat Slab Top 5 Core Strength 6 Absorption 7 Hydrostatic 8 Permeability 9 Manhole Step 10 Cylinder 11 Gasket Lubricant 12 Joint Shear 13 Alkalinity 14 Gasket Measurements 15 1.3 The test specimens shall not have been exposed to a temperature below 4°C for the 24 h immediately preceding the test. 1.4 If any test specimen fails because of mechanical reasons such as failure of testing equipment or improper specimen preparation, it shall be discarded and another specimen taken. 1.5 Specimens shall be selected in accordance with the specifications for the type of pipe or tile being tested. 1.6 These methods are the metric companion of Test Methods C497. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C497M-17 Referenced Document

• ASTM C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens*， 2023-10-20 Update
• ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field*， 2024-04-01 Update
• ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
• ASTM C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM C617 Standard Practice for Capping Cylindrical Concrete Specimens
• ASTM C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
• ASTM C822 Standard Terminology Relating to Concrete Pipe and Related Products
• ASTM D2240 Standard Test Method for Properties of Rubber &8212; Durometer Hardness*， 2024-04-22 Update
• ASTM E4 Standard Practices for Force Verification of Testing Machines

ASTM C497M-17 history

• 2020 ASTM C497M-20a Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
• 2020 ASTM C497-20e1 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
• 2020 ASTM C497M-20 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
• 2019 ASTM C497M-19a Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
• 2019 ASTM C497M-19 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
• 2018 ASTM C497-18b Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
• 2018 ASTM C497-18a Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
• 2018 ASTM C497M-18 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
• 2017 ASTM C497M-17 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
• 2016 ASTM C497-16a Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
• 2016 ASTM C497M-16 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
• 2015 ASTM C497M-15 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
• 2014 ASTM C497M-14 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile &40;Metric&41;
• 2013 ASTM C497M-13ae1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile 40;Metric41;
• 2013 ASTM C497M-13a Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile lpar;Metricrpar;
• 2013 ASTM C497-13e1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
• 2013 ASTM C497M-13 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
• 2005 ASTM C497M-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
• 2004 ASTM C497M-04e1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
• 2004 ASTM C497M-04 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
• 2003 ASTM C497M-03a Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
• 2003 ASTM C497M-03 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
• 2002 ASTM C497M-02 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
• 1998 ASTM C497-98 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
• 1997 ASTM C497M-97 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]