ASTM B999-15
Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
- Standard No.
- ASTM B999-15
- Release Date
- 2015
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM B999-15(2022)
- Latest
- ASTM B999-15(2022)
- Scope
1.1 This specification covers the requirements for electrodeposited coatings of titanium and titanium-zirconium alloys on conductive and non-conductive substrates for engineering (functional) uses. The coatings of titanium-zirconium alloys are those that range in zirconium between 10wt% and 14wt% zirconium and are known as “terne” metallic electrodeposits.
1.2 This specification applies for both conductive (metallic) substrates and non-conductive (plastics, fibers, carbon foam, etc.)
1.3 Electrodeposits of titanium and titanium-zirconium alloys on aluminum and conductive substrate and nonconductive substrate are produced where it is desired to obtain atmospheric corrosion resistance. Deposits of titanium and titanium-zirconium alloys particularly on aluminum have shown to have excellent corrosion protective qualities in atmospheric exposure, especially when under-coated by electroless nickel. Titanium and titanium-zirconium alloy deposits provide corrosion protection from dilute sulfuric acid, are used for lining of brine refrigeration tanks, chemical equipment apparatus, storage batteries, and as a wear coating for bearing surfaces.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM B999-15 Referenced Document
- ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
- ASTM B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating*， 2020-11-01 Update
- ASTM B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating
- ASTM B320 Standard Practice for Preparation of Iron Castings for Electroplating*， 2019-04-01 Update
- ASTM B322 Standard Guide for Cleaning Metals Prior to Electroplating*， 2020-11-01 Update
- ASTM B374 Standard Terminology Relating to Electroplating
- ASTM B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
- ASTM B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method*， 2023-05-01 Update
- ASTM B507 Standard Practice for Design of Articles to Be Electroplated on Racks
- ASTM B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method*， 2024-04-22 Update
- ASTM B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry*， 2021-04-01 Update
- ASTM B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- ASTM B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings*， 2021-10-01 Update
- ASTM B727 Standard Practice for Preparation of Plastics Materials for Electroplating
- ASTM B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
- ASTM B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
- ASTM B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement*， 2022-05-01 Update
- ASTM B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- ASTM D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
- ASTM D3359 Standard Test Methods for Measuring Adhesion by Tape Test
- ASTM D5185 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
- ASTM F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments
ASTM B999-15 history
- 2022 ASTM B999-15(2022) Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
- 2015 ASTM B999-15 Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
