UL 1017 BULLETIN-2011
UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: FEBRUARY 20@ 2012)

Standard No.
UL 1017 BULLETIN-2011
Release Date
2011
Published By
Underwriters Laboratories (UL)
Status
Replace By
UL 1017 CRD-2011
Latest
UL 1017 BULLETIN-2023
Scope
This Standard applies to motor-operated vacuum cleaners and blower cleaners@ and to household use floor finishing machines to be employed in accordance with the Canadian Electrical Code Part I (CEC)@ and the National Electrical Code (NEC)@ ANSI/NFPA 70.These requirements cover:a) household@ commercial@ and coin-operated vacuum cleaning machines and blower cleaners@ intended for indoor or outdoor use or both;b) household@ commercial@ and coin-operated wet pick-up@ dry pick-up@ permanently mounted@ portable@ and central vacuum cleaners and blower cleaner systems;c) household current-carrying hoses for dry pick-up@ indoor use;d) household accessory electrified wall valves for central vacuum cleaning systems for connection of current-carrying hose/motorized nozzle combinations; ande) household electrically powered floor finishing machines@ including floor polishers@ floor scrubbers@ floor sanders@ rug shampooers@ rug and floor washers@ and similar machines.The requirements do not cover appliances rated more than 250 volts. An appliance that utilizes some other source of energy@ such as gas or steam@ in addition to electric energy is to be investigated under these requirements and under such additional requirements as are applicable to the appliance under consideration.These requirements do not cover appliances for use in locations such as those areas of hospitals@ laboratories@ institutions@ and the like where dispersion of pathological@ chemical@ physical@ radioactive or other agents could produce a risk of health. Appliances intended for use in such locations are investigated under these requirements and under such additional requirements as?are applicable to the appliance@ with appropriate consideration being given to the specific intended use.Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard.There requirements apply only to a specific type or types of appliances@ such as a vacuum cleaner or floor finishing machine@ if the requirement is so identified by specific reference to the type or types involved. Absence of such specific reference or use of the term ??appliance?? indicates that the requirement applies to all appliances covered by this standard.

UL 1017 BULLETIN-2011 history

  • 2023 UL 1017 BULLETIN-2023 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines
  • 2023 UL 1017-2023 STANDARD FOR SAFETY Vacuum Cleaners , Blower Cleaners, and Household Floor Finishing Machines
  • 2018 UL 1017 CRD-2018 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines - Section / Paragraph Reference: 6.17.2.1 Subject: Double Insulation Motor Overload Testing on Complete Appliance SUPERCEDES PRIOR CERTIFICATION REQUIREMENT DE
  • 2017 UL 1017 CRD-2017 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines - Section / Paragraph Reference: 4.13.5 Subject: Evaluation of LED Light Sources (Edition 10: September 15@ 2017)
  • 2017 UL 1017 BULLETIN-2017 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: JUNE 13@ 2017)
  • 2017 UL 1017-2017 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (Tenth Edition; Reprint with Revisions Through and Including July 19@ 2018)
  • 2015 UL 1017 CRD-2015 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines - Section / Paragraph Reference: 4.4.1.4 Subject: Commercial Appliance Attachment Plug Rating (Edition 8: September 10, 2010)
  • 2015 UL 1017-2015 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines (Ninth Edition)
  • 2014 UL 1017 CRD-2014 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines - Section / Paragraph Reference: Clause 7 Subject: Battery-Powered Portable Appliance Requirements for Class 2 and Non-Class 2 Chargers, Vehicle Battery Adapte
  • 2014 UL 1017 BULLETIN-2014 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: JULY 29@ 2014)
  • 2013 UL 1017 CRD-2013 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines - Section / Paragraph Reference: 4.8.1.1@ 4.8A@ 5.29 Subject: Motor Requirements (Edition 8: September 10@ 2010)
  • 2013 UL 1017 BULLETIN-2013 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: March 11@ 2013)
  • 2012 UL 1017 CRD-2012 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines - Section / Paragraph Reference: Figure 25 Subject: Correction of Figure 25 Probe Measurement “D” (Edition 8: September 10, 2010)
  • 2012 UL 1017 BULLETIN-2012 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: December 17@ 2012)
  • 2011 UL 1017 CRD-2011 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines - Section / Paragraph Reference: Clauses 2 and 7 Subject: Automatic Rechargeable Battery-Powered Vacuum Cleaners (Edition 8: September 10, 2010)
  • 2011 UL 1017 BULLETIN-2011 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: FEBRUARY 20@ 2012)
  • 2010 UL 1017 CRD-2010 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines - Section / Paragraph Reference: 3.1.1, 4.4.1, 4.8.1, Appendix A Subject: (1) UL and CSA Component Requirement, (2) Cord Reels, and (3) Revisions to Annex A Su
  • 2010 UL 1017 BULLETIN-2010 SUMMARY OF TOPICS The following topics for the Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines, UL 1017, are being recirculated: 1. The proposed eighth edition of UL 1017. The following technical changes are being
  • 2010 UL 1017-2010 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (Eighth Edition)
  • 2009 UL 1017 BULLETIN-2009 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: FEBRUARY 23@ 2009)
  • 2008 UL 1017 BULLETIN-2008 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (COMMENTS DUE: MAY 12@ 2008)
  • 2007 UL 1017 BULLETIN-2007 UL Standard for Safety Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines COMMENTS DUE: DECEMBER 10, 2007
  • 2005 UL 1017 BULLETINS-2005 Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines (proposals dated 11-18-05)
  • 2005 UL 1017 BULLETIN-2005 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines
  • 2004 UL 1017 BULLETINS-2004 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines (09/27/2004 (12p); 04/09/2004 (14p))
  • 2002 UL 1017 BULLETIN-2002 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines
  • 2001 UL 1017 BULLETIN-2001 UL Standard for Safety Vacuum Cleaners@ Blower Cleaners@ and Household Floor Finishing Machines
  • 2001 UL 1017-2001 Vacuum cleaners, blower cleaners, and household floor finishing machines
  • 1996 UL 1017-1996 Vacuum cleaners, blower cleaners, and household floor finishing machines
  • 1992 UL 1017-1992 Vacuum cleaning machines and blower cleaners



Copyright ©2024 All Rights Reserved