ASTM D5800-21
Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

Standard No.

ASTM D5800-21

Release Date

2021

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D5800-21

Scope

1.1 This test method covers four procedures for determining the evaporation loss of lubricating oils (particularly engine oils). The evaporation measured is reported as percent total loss. The test method relates to one set of operating conditions but may be readily adapted to other conditions as required. 1.2 Procedure B and Procedure D that are in the main section of the test method provide equivalent results. Procedures A and C, which are in Annex A1 and Annex A2, have equivalent results. It has been determined that Procedures A and C show a slight bias when compared to Procedures B and D. Procedures B and D give slightly higher results versus Procedures A and C on formulated engine oils, while Procedures B and D give lower results versus Procedures A and C on basestocks. Thus, a correction factor is utilized to convert between the two sets of Procedures based on the fluid type. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D5800-21 Referenced Document

• ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
• ASTM D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
• ASTM D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance*， 2023-07-01 Update
• ASTM D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

ASTM D5800-21 history

• 2021 ASTM D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2020 ASTM D5800-20 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2019 ASTM D5800-19a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2019 ASTM D5800-19 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2018 ASTM D5800-18a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2018 ASTM D5800-18 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2015 ASTM D5800-15a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2015 ASTM D5800-15 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2014 ASTM D5800-14e2 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2014 ASTM D5800-14e1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2014 ASTM D5800-14 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2010 ASTM D5800-10 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2008 ASTM D5800-08 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2005 ASTM D5800-05 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2004 ASTM D5800-04a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2004 ASTM D5800-04 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2003 ASTM D5800-03a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2003 ASTM D5800-03 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2000 ASTM D5800-00ae1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
• 2000 ASTM D5800-00a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method