These requirements cover round or flat metal-clad cables that contain 18 AWG ?C 2000 kcmil insulated circuit conductors with or without one or more optical-fiber members@ all enclosed in armor consisting of interlocked metal strip or a smooth or corrugated metal tube. Round cables contain one or more insulated circuit conductors. Flat cable contains two or three insulated circuit conductors. These electrical and hybrid electrical/optical-fiber cables are for use (optical and electrical functions associated in the case of a hybrid cable) as Type MC cable in accordance with Article 330 and other applicable parts of the National Electrical Code.These requirements cover round or flat armored cables that have thermoplastic or thermoset insulation and are for use at potentials not exceeding 600 V (thermoplastic) or 600 or 2000 V (thermoset) where subjected to temperatures not exceeding 75??(167?? or 90??(194??@ depending upon the voltage and temperature ratings of the circuit conductors in the cable. Cables with 600 V conductors that also include one or more optical-fiber members have "-OF" supplementing the type letters and are limited to carrying optical energy that has been ruled not hazardous to the human body.Type MV (medium-voltage) cables rated for 5000 ?C 35000 V are covered in separate requirements. A multiple-conductor Type MV cable with a smooth (other than lead) or corrugated metal sheath or with interlocked metal armor may be marked for use also as Type MC cable.These requirements do not cover Type AC armored cables (see the Standard for Armored Cables@ UL 4). Metal-clad cables for use in Division 1 and Zone 1 hazardous locations are required to comply with this standard and the Standard for Metal-Clad Cables and Cable-Sealing Fittings for Use in Hazardous (Classified) Locations@ UL 2225.These requirements do not cover the optical or other performance of any optical-fiber member or group of such members. See 8.3.A cable to which the designation "ST1" (signifying "limited smoke") is applied as a type-letter suffix@ complies with the test criteria for smoke release and for cable damage height stated in the Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables@ UL 1685. See Section 30 (test requirement) and 38.1 (marking requirement) of Metal-Clad Cables@ UL 1569.
UL 1569 BULLETIN-2010 history
2018UL 1569 CRD-2018 UL Standard for Safety Metal-Clad Cable - Section / Paragraph Reference: 5.4 Subject: (Edition 5: May 4@ 2018)
2018UL 1569 BULLETIN-2018 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: MARCH 12@ 2018)
2018UL 1569-2018 UL Standard for Safety Metal-Clad Cables (Fifth Edition)
2017UL 1569 BULLETIN-2017 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: FEBRUARY 17@ 2017)
2016UL 1569 CRD-2016 UL Standard for Safety Metal-Clad Cables - Section / Paragraph Reference: Table 9.2@ 9.4.2 Subject: Revised length of lay requirement for the signal and/or control cables within a pre-cabled group (Edition 4: November 13@ 2014)
2015UL 1569 CRD-2015 UL Standard for Safety Metal-Clad Cables - Section / Paragraph Reference: 9.4 Subject: Binder Jacket SUPERCEDES PRIOR CERTIFICATION REQUIREMENT DECISION DATED 2014-12-19 (Edition 4: November 13, 2014)
2015UL 1569 BULLETIN-2015 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: SEPTEMBER 7@ 2015)
2014UL 1569 CRD-2014 UL Standard for Safety Metal-Clad Cables - Section / Paragraph Reference: 9.4 Subject: Binder Jacket (Edition 4: November 13, 2014)
2014UL 1569 BULLETIN-2014 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: FEBRUARY 17@ 2014)
2014UL 1569-2014 UL Standard for Safety Metal-Clad Cables (Fourth Edition; Reprint with revisions through and including December 18@ 2015)
2011UL 1569 BULLETIN-2011 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: November 21@ 2011)
2010UL 1569 BULLETIN-2010 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: December 13@ 2010)
2009UL 1569 BULLETIN-2009 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: March 30@ 2009)
2008UL 1569 BULLETIN-2008 UL Standard for Safety Metal-Clad Cables (COMMENTS DUE: January 12@ 2009)
2006UL 1569 BULLETINS-2006 UL Standard for Safety Metal-Clad Cables (09/08/2006 (10p); 06/21/2006 (6p); 05/03/2006 (4p))