ASTM E696-23 PDF

Scope: 1.1 This specification covers the requirements for bare, solid conductor, tungsten and rhenium alloy thermoelements having diameters of 0.127 mm (0.005 in.) to 0.508 mm (0.020 in.) supplied in matched pairs. These thermoelements shall be suitable for use either in bead-insulated, bare-wire thermocouples, or in compacted metal-sheathed, ceramic insulated thermocouple material or assemblies. 1.2 This specification covers the thermocouple combinations of tungsten-3 % rhenium versus tungsten-25 % rhenium (W3Re/W25Re) and tungsten-5 % rhenium versus tungsten-26 % rhenium (W5Re/W26Re; Type C). All information applies to both combinations unless otherwise noted. 1.3 It is recognized that the alloys described are refractory and are not suitable for use at high temperatures in oxidizing atmospheres. All tests and processes described herein must be performed under conditions that are non-reactive to tungsten-rhenium alloys. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E696-23 history

2023 ASTM E696-23 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
2018 ASTM E696-07(2018) Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
2007 ASTM E696-07(2013) Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
2007 ASTM E696-07 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
2000 ASTM E696-00 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire