ASTM F2970-20
Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts

Standard No.

ASTM F2970-20

Release Date

2020

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM F2970-22

Latest

ASTM F2970-22

Scope

1.1 The purpose of this practice is to delineate requirements regarding the design, manufacture, installation, operation, maintenance, inspection and major modification of commercial or institutional trampoline courts with the primary purpose of amusement, entertainment or recreation. 1.2 This standard applies to institutional trampoline courts that are located in and around amusement, entertainment or recreational facilities. Such facilities include but are not limited to trampoline parks, amusement parks, theme parks, water parks, family entertainment centers, fitness centers, gyms, gymnastics facilities, sports facilities, skate parks, camps, shopping centers, temporary special events, carnivals and municipal parks. 1.3 This standard applies to devices manufactured on or after the date of publication of this standard practice. 1.4 This practice establishes guidelines that will provide a level of conformity for the purpose of reducing potential hazards to patrons, court attendants, and spectators. 1.5 This standard does not purport to address all of the hazards associated with institutional trampoline courts. The standard’s existence alone will not prevent injuries. Like other physical activities, institutional trampoline court use involves the risk of injury, particularly if the equipment is used improperly or if users exceed their capabilities, endurance, training, or experience. 1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.7 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory criteria. 1.8 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory criteria. 1.9 This standard includes the following sections: Section Scope 1 Referenced Documents 2 Terminology 3 Significance and Use 4 Quality, Manufacture, Construction and Installation 5 General Design 6 Design 7 Major Modification 8 Information Plate 9 Information Requirements 10 Certifications 11 Performance Criteria 12 Classification of Injuries and Illnesses 13 Notification Requirements 14 Manufacturer Responsibilities 15 Owner/Operator Responsibilities 16 Patron Education 17 Patron Responsibility 18 Children Zones 19 Keywords 20 Appendix Appendix X1 1.10 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.11 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.12 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 This practice is under the jurisdiction of ASTM Committee F24 on Amusement Rides and Devices and is the direct responsibility of Subcommittee F24.61 on Adventure Attractions. Current edition approved Feb. 1, 2020. Published February 2020. Originally approved in 2013. Last previous edition approved in 2017 as F2970 – 17. DOI: 10.1520/F2970-20. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 2. Referenced Documents

ASTM F2970-20 Referenced Document

• ASTM D3574 Standard Test Methods for Flexible Cellular Materials8212;Slab, Bonded, and Molded Urethane Foams
• ASTM D3786 Standard Test Method for Bursting Strength of Textile Fabricsx2014;Diaphragm Bursting Strength Tester Method
• ASTM D3787 Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
• ASTM D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
• ASTM D4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
• ASTM D4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
• ASTM D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
• ASTM D5672 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique
• ASTM D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
• ASTM D737 Test Method for Air Permeability of Textile Fabrics
• ASTM E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
• ASTM F1193 Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program
• ASTM F2291 Standard Practice for Design of Amusement Rides and Devices
• ASTM F2374 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
• ASTM F2375 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
• ASTM F2650 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
• ASTM F355 Standard Test Method for Shock-Absorbing Properties of Playing Surface Systems and Materials
• ASTM F747 Standard Terminology Relating to Amusement Rides and Devices
• ASTM F770 Standard Practice for Operation Procedures for Amusement Rides and Devices

ASTM F2970-20 history

• 2022 ASTM F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
• 2020 ASTM F2970-20 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
• 2017 ASTM F2970-17 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
• 2015 ASTM F2970-15 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
• 2013 ASTM F2970-13 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts