ASTM D1691-17
Standard Test Methods for Zinc in Water
- Standard No.
- ASTM D1691-17
- Release Date
- 2017
- Published By
- American Society for Testing and Materials (ASTM)
- Latest
- ASTM D1691-17
- Scope
- 1.1 These test methods cover the determination of zinc in water. Section 26 on Quality Control pertains to these test methods. Two test methods are given as follows: Test Method Concentration Range Sections A—Atomic Absorption, Direct 0.05 to 2 mg/L 8 – 16 B—Atomic Absorption, Chelation-Extraction 20 to 200 µg/L 17 – 25 1.2 Either dissolved or total recoverable zinc may be determined. 1.3 These test methods have been used successfully with reagent grade water. See the specific test method for applicability to other matrices. It is the user’s responsibility to assure the validity of these test methods in other matrices. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6 and 12.7.1, 21.7, 23.10. 1.6 Two former colorimetric test methods were discontinued. Refer to Appendix X1 for historical information. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D1691-17 Referenced Document
- ASTM D1066 Standard Practice for Sampling Steam
- ASTM D1068 Standard Test Methods for Iron in Water
- ASTM D1129 Standard Terminology Relating to Water
- ASTM D1193 Standard Specification for Reagent Water
- ASTM D1687 Standard Test Methods for Chromium in Water
- ASTM D1688 Standard Test Methods for Copper in Water
- ASTM D1886 Standard Test Methods for Nickel in Water
- ASTM D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
- ASTM D2777 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
- ASTM D3370 Standard Practices for Sampling Water from Closed Conduits
- ASTM D3557 Standard Test Methods for Cadmium in Water
- ASTM D3558 Standard Test Methods for Cobalt in Water
- ASTM D3559 Standard Test Methods for Lead in Water
- ASTM D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents*， 2018-10-15 Update
- ASTM D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma8212;Mass Spectrometry
- ASTM D5810 Standard Guide for Spiking into Aqueous Samples *， 2021-07-01 Update
- ASTM D5847 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
- ASTM D858 Standard Test Methods for Manganese in Water
ASTM D1691-17 history
- 2017 ASTM D1691-17 Standard Test Methods for Zinc in Water
- 2012 ASTM D1691-12 Standard Test Methods for Zinc in Water
- 2002 ASTM D1691-02(2007)e1 Standard Test Methods for Zinc in Water
- 2002 ASTM D1691-02 Standard Test Methods for Zinc in Water
- 1995 ASTM D1691-95 Standard Test Methods for Zinc in Water
- 1990 ASTM D1691-90 Standard Test Methods for Zinc in Water
