IEC 62288:2008 Maritime navigation and radiocommunication equipment and systems – Presentation of navigation-related information on shipborne navigational displays – General requirements@ methods of testing and required test results (Edition 1.0)
This International Standard specifies the general requirements@ methods of testing@ and required test results@ for the presentation of navigation-related information on shipborne navigational displays in support of IMO resolution MSC.191(79). (MSC191/1) IMO resolution MSC.191(79) harmonizes the requirements for the presentation of navigation-related information on the bridge of a ship to ensure that all navigational displays adopt a consistent human machine interface philosophy and implementation. (MSC191/1) IMO resolution MSC.191(79) supplements and@ in the case of a conflict@ takes priority over@ the presentation requirements of the individual performance standards adopted by the IMO for relevant navigational systems and equipment and covers the presentation of navigation-related information by equipment for which Performance Standards have not been adopted by the IMO. This standard also addresses the guidelines for the presentation of navigation-related symbols@ terms and abbreviations in Safety of Navigation circular SN/Circ.243 together with some requirements published in resolution MSC.192(79) on radar; resolution MSC.232(82) on ECDIS; and ergonomic criteria published in circular MSC/Circ.982. The symbols from SN/Circ.243 are reproduced and expanded upon in Annex A. The terms and abbreviations from SN/Circ.243 are reproduced and expanded upon in Annex B. Additional guidance on display and dialogue design from MSC/Circ.982 is listed by reference in Annex C. Some requirements set forth in MSC.191(79) duplicate requirements set forth in other IMO documents (for example@ Resolutions A.694(17)@ MSC.192(79)@ MSC.232(82)@ etc.) or in the IEC standards further specifying the methods of test and required test results for those requirements (for example@ IEC 60945@ IEC 61174@ IEC 62388@ etc.). Where a requirement in this standard duplicates a requirement in another standard@ the method(s) of test for that requirement may refer to the other standard. NOTE Manufactures may offer relevant test data from compliance tests to other standards such as IEC 60945@ IEC 61174@ IEC 62388@ etc. as evidence of compliance with appropriate tests of this standard. This standard is organized so that each group of requirements is immediately followed by a clause identifying the method(s) of test. The methods of test are derived from ISO 9241-12 on the presentation of information on visual displays. Guidance on testing is provided in Annex D. NOTE All text in this standard whose wording is identical to text contained in an IMO document is printed in italics. Reference to the document is noted at the beginning of the paragraph. The notation contains a prefix referring to the document and a suffix with the paragraph number from the document (for example@ (MSC191/1); (SN243/1)@ etc.). Purpose (MSC191/2) This standard specifies the presentation of navigational information on the bridge of a ship@ including the consistent use of navigational terms@ abbreviations@ colours and symbols@ as well as other presentation characteristics. (MSC191/2) This standard also addresses the presentation of information related to specific navigational tasks by recognising user selected presentations in addition to presentations required by the relevant individual performance standards adopted by the IMO. Application (MSC191/3) This standard is applicable to any display equipment associated with the navigational systems and equipment for which individual performance standards have been adopted by the IMO. It addresses the stand-alone displays for radar and ECDIS@ the multifunction displays used in IBS and INS and composite presentations that integrate information derived from two or more systems. This standard also addresses display equipment associated with navigational systems and equipment for which individual performance standards have not been adopted by the IMO. NOTE Some IEC standards may individually include display requirements in conformity with IMO resolution MSC.191(79). (MSC191/3) The general principles and the physical characteristics specified in Clauses 4 and 7@ respectively@ of this standard are applicable to all displays on the bridge of a ship.
IEC 62288:2008 history
0000 IEC 62288:2021 CMV
2014IEC 62288:2014 Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results
2008IEC 62288:2008 Maritime navigation and radiocommunication equipment and systems – Presentation of navigation-related information on shipborne navigational displays – General requirements@ methods of testing and required test results (Edition 1.0)