ASTM D3630-89(1993)

Standard No.
ASTM D3630-89(1993)
Release Date
1993
Published By
American Society for Testing and Materials (ASTM)
Latest
ASTM D3630-89(1993)
Scope
  Full Description 1.1 This guide applies to liquid protective coatings, related products, and their dried films. It is a guide for the selection of analytical procedures for the determination of the presence and quantity of selected materials that may present potential physiological hazards. 1.2 Various levels of government have established laws and regulations that limit the quantity or prohibit the presence of certain materials classified as hazardous in protective coatings. Materials subject to such regulations are within the scope of this guide. 1.3 A hazardous material within the scope of this guide is one that exhibits harmful physiological effects through ingestion, inhalation, absorption, or skin or eye contact. Hazards associated with combustion are not within its scope. 1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D3630-89(1993) Referenced Document

  • ASTM D126 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green*2023-06-01 Update
  • ASTM D1301 Standard Test Methods for Chemical Analysis of White Lead Pigments*2020-06-01 Update
  • ASTM D1844 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate*2020-06-01 Update
  • ASTM D1845 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment*2020-06-01 Update
  • ASTM D215 Standard Practice for the Chemical Analysis of White Linseed Oil Paints*2002-01-01 Update
  • ASTM D2348 Standard Test Method for Arsenic in Paint
  • ASTM D2349 Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints*2020-02-01 Update
  • ASTM D2350 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
  • ASTM D2371 Standard Test Method for Pigment Content of Solvent-Reducible Paints
  • ASTM D2372 Standard Practice for Separation of Vehicle From Solvent-Reducible Paints*2022-12-01 Update
  • ASTM D2374 Standard Test Method for Lead in Paint Driers by EDTA Method
  • ASTM D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints*2016-12-01 Update
  • ASTM D2698 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
  • ASTM D2742 
  • ASTM D283 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
  • ASTM D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography*1997-04-21 Update
  • ASTM D3271 Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
  • ASTM D3272 Standard Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis
  • ASTM D3280 Standard Test Methods for Analysis of White Zinc Pigments*2020-06-01 Update
  • ASTM D3329 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography*1999-04-21 Update
  • ASTM D3335 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy*2020-02-01 Update
  • ASTM D3432 Standard Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by Gas Chromatography*1996-01-01 Update
  • ASTM D3618 Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • ASTM D3624 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy*2022-06-01 Update
  • ASTM D3717 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy*2022-06-01 Update
  • ASTM D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy*2022-06-01 Update
  • ASTM D444 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)*2020-06-01 Update
  • ASTM D49 Standard Test Methods of Chemical Analysis of Red Lead*2020-06-01 Update
  • ASTM D564 Standard Test Methods for Liquid Paint Driers*2023-07-01 Update
  • ASTM D715 Standard Test Methods for Analysis of Barium Sulfate Pigment*2020-06-01 Update
  • ASTM E202 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols*2018-03-15 Update
  • ASTM E260 Standard Practice for Packed Column Gas Chromatography*2019-09-01 Update

ASTM D3630-89(1993) history




Copyright ©2024 All Rights Reserved