UL 25B-2014
UL Standard for Safety Meters for Diesel Fuel@ Biodiesel Fuel@ Diesel/ Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20)@ Kerosene@ and Fuel Oil (First Edition; Reprint with revisions through and including January 21@ 2015)

Standard No.

UL 25B-2014

Release Date

2014

Published By

Underwriters Laboratories (UL)

Status

Be replaced 2014-11

Replace By

UL 25B BULLETIN-2014

Latest

UL 25B-2020

Scope

These requirements cover positive displacement liquid meters for use with motor fuels. Motor fuels@ as defined by these requirements@ include one or more of the fuels described in 1.2. Meters covered by these requirements are intended for use with one or more of the following as applicable: a) Diesel fuel and diesel/biodiesel blends with nominal biodiesel concentrations up to 5 percent (B0-B5) formulated in accordance with the Standard Specification for Diesel Fuel Oils@ ASTM D975; b) Diesel/biodiesel blends with nominal biodiesel concentrations from 5 percent up to 20 percent (B6 ?C B20) formulated in accordance with the Standard Specification for Diesel Fuel Oil@ Biodiesel Blends (B6 ?C B20)@ ASTM D7467; c) Biodiesel (B99.9/B100) formulated in accordance with the Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels@ ASTM D6751; d) Kerosene formulated in accordance with the Standard Specification for Kerosine@ ANSI/ ASTM D3699; or e) Fuel oil (heating oil) formulated in accordance with the Standard Specification for Fuel Oils@ ASTM D396. Meters covered by this standard are for use in accordance with the National Fire Protection Association's Flammable and Combustible Liquids Code@ ANSI/NFPA 30@ and the Code for Motor Fuel Dispensing Facilities and Repair Garages@ ANSI/NFPA 30A. These requirements do not cover: a) Meters for use with fuels other than as described in 1.2; b) Velocity meters@ head meters@ or area meters; c) Meters for use in centralized fuel oil distribution systems; and d) Meter components incorporating electrical circuits except those meeting intrinsically safe or explosion standards. Determinations of the suitability of registers@ counters@ or computers used or provided with these meters@ or the accuracy of measurement resulting from or required in actual application are not within the scope of these requirements.

UL 25B-2014 history

• 1970 UL 25B-2020 UL Standard for Safety Meters for Diesel Fuel Biodiesel Fuel Diesel/ Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20) Kerosene and Fuel Oil
• 2017 UL 25B BULLETIN-2017 UL Standard for Safety Meters for Diesel Fuel@ Biodiesel Fuel@ Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20)@ Kerosene@ and Fuel Oil (COMMENTS DUE: OCTOBER 30@ 2017)
• 2016 UL 25B BULLETIN-2016 UL Standard for Safety Meters for Diesel Fuel@ Biodiesel Fuel@ Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20)@ Kerosene@ and Fuel Oil (COMMENTS DUE: SEPTEMBER 26@ 2016)
• 2014 UL 25B BULLETIN-2014 UL Standard for Safety OUTLINE OF INVESTIGATION FOR METERS FOR DIESEL FUEL@ BIODIESEL FUEL@ DIESEL/BIODIESEL BLENDS WITH NOMINAL BIODIESEL CONCENTRATIONS UP TO 20 PERCENT (B20)@ KEROSENE@ AND FUEL OIL (COMMENTS DUE: DECEMBER 8@ 2014)
• 2014 UL 25B-2014 UL Standard for Safety Meters for Diesel Fuel@ Biodiesel Fuel@ Diesel/ Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20)@ Kerosene@ and Fuel Oil (First Edition; Reprint with revisions through and including January 21@ 2015)
• 2013 UL 25B BULLETIN-2013 UL Standard for Safety OUTLINE OF INVESTIGATION FOR METERS FOR DIESEL FUEL@ BIODIESEL FUEL@ DIESEL/BIODIESEL BLENDS WITH NOMINAL BIODIESEL CONCENTRATIONS UP TO 20 PERCENT (B20)@ KEROSENE@ AND FUEL OIL (COMMENTS DUE: JANUARY 20@ 2014)