SAE AMS4110B-1968
ALUMINUM ALLOY BARS@ ROLLED OR COLD FINISHED 4.0Cu- 0.70Mn- 0.50Mg (2017-T451) Stress-Relief Stretched

Standard No.

SAE AMS4110B-1968

Release Date

1968

Published By

SAE - SAE International

Status

Be replaced 2017-04

Replace By

SAE AMS4110C-1976

Latest

SAE AMS4110D-1983

Scope

Primarily for machined parts subject to excessive warpage during machining due to residual stresses@ and for parts requiring good strength and whose fabrication does not involve welding. Certain design and processing procedures may cause this material to be susceptible to stress corrosion cracking; ARP 823 recommends practices to minimize such conditions

SAE AMS4110B-1968 history

• 1983 SAE AMS4110D-1983 ALUMINUM ALLOY BARS & RODS@ ROLLED OR COLD FINISHED
• 1976 SAE AMS4110C-1976 ALUMINUM ALLOY BARS AND ROADS@ ROLLED OR COLD FINISHED 4.0Cu- 0.70Mn- 0.50Mg (2017-T451) Stress-Relief Stretched (UNS A92017)
• 1968 SAE AMS4110B-1968 ALUMINUM ALLOY BARS@ ROLLED OR COLD FINISHED 4.0Cu- 0.70Mn- 0.50Mg (2017-T451) Stress-Relief Stretched
• 1966 SAE AMS4110A-1966 ALUMINUM ALLOY BARS@ ROLLED OR COLD FINISHED 4. OCu- 0. 70Mn- 0. 50Mg (2017-T451) Stress-Relief Stretched
• 1965 SAE AMS4110-1965 ALUMINUM ALLOY BARS@ ROLLED@ OR COLD FINISHED 4.0CU - 0.7MN - 0.50MG (2017-T451) STRESS-RELIEF STRETCHED