ASTM B528-16(2020)e1
Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

Standard No.
ASTM B528-16(2020)e1
Release Date
2020
Published By
American Society for Testing and Materials (ASTM)
Latest
ASTM B528-16(2020)e1
Scope
1.1 This test method covers determination of the transverse rupture strength of sintered, including post-treated, powder metallurgy test specimens by subjecting them to a uniformly increasing transverse force under controlled conditions. The term “transverse rupture strength” as used herein, defines the stress, calculated from the flexure formula required to break a specimen as a simple beam supported near the ends and applying the force midway between the fixed line center of the supports. 1.2 Limitations—The transverse rupture test is only applicable to relatively brittle materials. In cases where a ductile specimen is being tested and the permanent deflection as a result of testing exceeds 0.02 in. (0.5 mm), the test results may be questionable. 1.3 Test Method B406 should be consulted for determining the transverse rupture strength of cemented carbides. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM B528-16(2020)e1 Referenced Document

  • ASTM B243 Standard Terminology of Powder Metallurgy*2023-05-01 Update
  • ASTM B312 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
  • ASTM B406 Standard Test Method for Transverse Rupture Strength of Cemented Carbides*2021-04-01 Update
  • ASTM B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens*2022-03-01 Update
  • ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

ASTM B528-16(2020)e1 history

  • 2020 ASTM B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
  • 2016 ASTM B528-16 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
  • 2012 ASTM B528-12 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
  • 2010 ASTM B528-10 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
  • 2005 ASTM B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
  • 1999 ASTM B528-99 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens



Copyright ©2024 All Rights Reserved