ASTM E176-21ae1
Standard Terminology of Fire Standards

Standard No.
ASTM E176-21ae1
Release Date
2021
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM E176-24
Latest
ASTM E176-24
Scope
1.1 This terminology covers terms, related definitions, and descriptions of terms used or likely to be used in fire-testresponse standards, fire-hazard-assessment standards, and firerisk-assessment standards. Definitions of terms are specialpurpose definitions that are consistent with the standard definitions but are written to ensure that a specific fire-testresponse standard, fire-hazard-assessment standard, or firerisk-assessment standard is properly understood and precisely interpreted. NOTE 1—For additional information, refer to ASTM Policy on Fire Standards.2 See also Annex A1 of Practice E535. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This fire standard cannot be used to provide quantitative measures. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E176-21ae1 Referenced Document

  • ASTM C1224 Standard Specification for Reflective Insulation for Building Applications
  • ASTM C1313 Standard Specification for Sheet Radiant Barriers for Building Construction Applications*， 2024-04-21 Update
  • ASTM D3675 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source
  • ASTM D5865 Standard Test Method for Gross Calorific Value of Coal and Coke
  • ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials
  • ASTM E1317 Standard Test Method for Flammability of Marine Surface Finishes
  • ASTM E1321 Standard Test Method for Determining Material Ignition and Flame Spread Properties
  • ASTM E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
  • ASTM E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
  • ASTM E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
  • ASTM E1355 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
  • ASTM E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC
  • ASTM E1474 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
  • ASTM E1509 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM E1513 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
  • ASTM E152 
  • ASTM E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies*， 2022-04-01 Update
  • ASTM E1537 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
  • ASTM E1546 Standard Guide for Development of Fire-Hazard-Assessment Standards*， 2024-04-21 Update
  • ASTM E1590 Standard Test Method for Fire Testing of Mattresses
  • ASTM E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E1623 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)*， 2022-11-01 Update
  • ASTM E163 
  • ASTM E1678 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
  • ASTM E1740 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter*， 2022-04-01 Update
  • ASTM E1822 Standard Test Method for Fire Testing of Stacked Chairs
  • ASTM E1995 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
  • ASTM E2032 Standard Guide for Extension of Data From Fire Endurance Tests
  • ASTM E2058 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
  • ASTM E2061 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles*， 2023-06-15 Update
  • ASTM E2067 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests*， 2023-11-01 Update
  • ASTM E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
  • ASTM E2187 Standard Test Method for Measuring the Ignition Strength of Cigarettes
  • ASTM E2226 Standard Practice for Application of Hose Stream*， 2023-12-01 Update
  • ASTM E2230 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material*， 2022-01-01 Update
  • ASTM E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics*， 2021-12-15 Update
  • ASTM E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies*， 2022-04-01 Update
  • ASTM E2280 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities*， 2021-12-15 Update
  • ASTM E2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus*， 2023-11-01 Update
  • ASTM E2335 Standard Guide for Laboratory Monitors*， 2022-11-01 Update
  • ASTM E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
  • ASTM E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characterist*， 2022-12-01 Update
  • ASTM E2405 Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen *， 2024-04-21 Update
  • ASTM E2536 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
  • ASTM E2573 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
  • ASTM E2574/E2574M Standard Test Method for Fire Testing of School Bus Seat Assemblies*， 2024-04-21 Update
  • ASTM E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristic*， 2022-11-01 Update
  • ASTM E2632/E2632M Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
  • ASTM E2652 Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750 °C*， 2022-11-01 Update
  • ASTM E2653 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Test Method with Fewer Than Six Participating Laboratories*， 2023-03-01 Update
  • ASTM E2688 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics*， 2023-12-15 Update
  • ASTM E2690 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics*， 2022-11-01 Update
  • ASTM E2707 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure*， 2022-04-01 Update
  • ASTM E2726/E2726M Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
  • ASTM E2749 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens*， 2023-12-01 Update
  • ASTM E2816 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
  • ASTM E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies*， 2023-12-01 Update
  • ASTM E2874 Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire*， 2023-11-01 Update
  • ASTM E2886/E2886M Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
  • ASTM E2912 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
  • ASTM E2957 Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
  • ASTM E2965 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter*， 2022-11-01 Update
  • ASTM E3048 Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel*， 2022-11-01 Update
  • ASTM E3082 Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees
  • ASTM E3202 Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics*， 2024-01-26 Update
  • ASTM E535 Standard Practice for Preparation of Fire-Test-Response Standards*， 2023-11-01 Update
  • ASTM E603 Standard Guide for Room Fire Experiments
  • ASTM E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
  • ASTM E800 Standard Guide for Measurement of Gases Present or Generated During Fires
  • ASTM E814 Standard Test Method for Fire Tests of Penetration Firestop Systems*， 2023-07-01 Update
  • ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
  • ASTM E906/E906M Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
  • ASTM E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source*， 2023-10-01 Update

ASTM E176-21ae1 history

Standard Terminology of Fire Standards


Copyright ©2024 All Rights Reserved