ASTM B956-07e1
Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

Standard No.

ASTM B956-07e1

Release Date

2007

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM B956-07e2

Latest

ASTM B956-19e1

Scope

1.1 This specification establishes the requirements for heat exchanger tubes manufactured from forge-welded copper and copper alloy tubing in straight lengths on which the external or internal surface, or both, has been modified by cold forming process to produce an integral enhanced surface for improved heat transfer. 1.2 Units—The values stated in either inch-pounds units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems could result in nonconformance with the specification. 1.3 The tubes are typically used in surface condensers, evaporators, and heat exchangers. 1.4 The product shall be produced of the following coppers or copper alloys, as specified in the ordering information. Copper or Copper Alloy UNS No. Type of Metal C12000A DLP Phosphorized, low residual phosphorus C12200A DHP Phosphorized, high residual phosphorus C19200 Phosphorized, 1 % iron C23000 Red Brass C44300 Admiralty, arsenical C44400 Admiralty, antimonial C44500 Admiralty, phosphorized C68700 Aluminum Brass C70400 95-5 Copper-Nickel C70600 90-10 Copper-Nickel C70620 90-10 Copper-Nickel (Modified for Welding) C71000 80-20 Copper-Nickel C71500 70-30 Copper-Nickel C71520 70-30 Copper-Nickel (Modified for Welding) C72200 Copper-Nickel A Copper UNS Nos. C12000, and C12200 are classified in Classification B 224. NOTE 1—Designations listed in Classification B 224. 1.5 The following safety hazard caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM B956-07e1 Referenced Document

• ASTM B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
• ASTM B154 Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
• ASTM B224 Standard Classification of Coppers
• ASTM B543 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
• ASTM B601 Standard Classification for Temper Designations for Copper and Copper Alloys-Wrought and Cast
• ASTM B846 Standard Terminology for Copper and Copper Alloys
• ASTM B858 Standard Test Method for Ammonia Vapor Test for Determination Susceptibility to Stress Corrosion Cracking in Copper Alloys
• ASTM E112 Standard Test Methods for Determining Average Grain Size
• ASTM E118 Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
• ASTM E243 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
• ASTM E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
• ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
• ASTM E478 Standard Test Methods for Chemical Analysis of Copper Alloys
• ASTM E527 Standard Practice for Numbering Metals and Alloys (UNS)
• ASTM E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
• ASTM E54 
• ASTM E62 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
• ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials

ASTM B956-07e1 history

• 2019 ASTM B956-19e1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• 2019 ASTM B956-19 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• 2010 ASTM B956/B956M-10e1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• 2010 ASTM B956-10 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• 2007 ASTM B956-07e2 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• 2007 ASTM B956-07e1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
• 2007 ASTM B956-07 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins