ASTM D2500-17a
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- Standard No.
- ASTM D2500-17a
- Release Date
- 2017
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D2500-23
- Latest
- ASTM D2500-23
- Scope
- 1.1 This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, and with a cloud point below 49 °C. NOTE 1—The interlaboratory program consisted of petroleum products of Test Method D1500 color of 3.5 and lower. The precisions stated in this test method may not apply to samples with ASTM color higher than 3.5. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 WARNING—Mercury has been designated by many regulatory agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website—http://www.epa.gov/mercury/faq.htm—for additional information. Users should be aware that selling mercury and/or mercury containing products into your state or country may be prohibited by law. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D2500-17a Referenced Document
- ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
- ASTM D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
- ASTM D7962 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift*， 2021-05-01 Update
- ASTM E1 Standard Specification for ASTM Thermometers
- ASTM E2251 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids*， 2021-12-01 Update
- ASTM E2877 Standard Guide for Digital Contact Thermometers*， 2024-04-21 Update
- ASTM E644 Standard Test Methods for Testing Industrial Resistance Thermometers
ASTM D2500-17a history
- 2023 ASTM D2500-23 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- 2017 ASTM D2500-17a Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- 2017 ASTM D2500-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- 2016 ASTM D2500-16b Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- 2016 ASTM D2500-16a Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
- 2016 ASTM D2500-16 Standard Test Method for Cloud Point of Petroleum Products
- 2011 ASTM D2500-11 Standard Test Method for Cloud Point of Petroleum Products
- 2009 ASTM D2500-09 Standard Test Method for Cloud Point of Petroleum Products
- 2005 ASTM D2500-05 Standard Test Method for Cloud Point of Petroleum Products
- 2002 ASTM D2500-02e1 Standard Test Method for Cloud Point of Petroleum Products
- 2002 ASTM D2500-02 Standard Test Method for Cloud Point of Petroleum Products
- 1999 ASTM D2500-99 Standard Test Method for Cloud Point of Petroleum Products
