BS ISO 2285:2019 Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
What is ISO 2285 – Rubber, vulcanized or thermoplastic about?
ISO 2285 specifies the number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading for relatively short periods under constant elongation or constant loading.
The constant-elongation test described in ISO 2285 is intended to measure the ability of rubbers to retain their elastic properties after extension, at a standard laboratory temperature, to a specified strain which is maintained for a specified time at the same or a specified higher temperature and then released at the test temperature or the standard laboratory temperature.
Note: The constant-load test is primarily intended for the measurement of the state of cure and the quality control of thin-walled products. An increase in the state of cure or degree of crosslinking is usually reflected in a decrease in the set, creep or elongation.
Who is ISO 2285 – Rubber, vulcanized or thermoplastic
BS ISO 2285:2019 history
2019BS ISO 2285:2019 Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
2013BS ISO 2285:2013 Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load