Thisstandard is concerned with the classification of areas where flammable gas or vapor or mist hazards (see Notes 1@ 2 and 3) may arise and may then be used as a basis to support the proper selection and installation of equipment for use in a hazardous area. It is intended to be applied where there may be an ignition hazard due to the presence of flammable gas or vapor@ mixed with air under normal atmospheric conditions (see Note 4)@ but it does not apply to a) mines susceptible to firedamp; b) the processing and manufacture of explosives; c) areas where a hazard may arise due to the presence of combustible dusts or fibres (refer to ANSI/ISA-60079-10-2); d) catastrophic failures which are beyond the concept of abnormality d ealt with in this standard (see Note 5); e) rooms used for medical purposes; f) domestic premises. This standard does not take into account the effects of consequential damage. Definitions and explanations of terms are given together with the main principl es and procedures relating to hazardous area classification. For detailed recommendations regarding the extent of the hazardous areas in specific industries or applications@ reference may be made to national or industry codes relating to those applications. NOTE 1 Flammable mists may form or be present at the same time as flammable vapors. Liquids not considered to be hazardous in terms of this standard (due to the flash point)@ when released under pressure may also generate flammable mists. In such cases@ the strict application of area classification for gases and vapors may not be appropriate as the basis for selection of equipment. Information on flammable mists is provided in Annex D. NOTE 2 The use of IEC 60079-14 for selection of equipment and installations is not required for mist hazards. IEC 60079-14 has not been adopted for use in the US. NOTE 3 For the purpose of this standard@ an area is a three -dimensional region or space. NOTE 4 Atmospheric conditions include variations above and below reference levels of 101@3 kPa (1 013 mbar) and 20 ??(293 K)@ provided that the variations have a negligible effect on the explosion properties of the flammable materials. NOTE 5 Catastrophic failure in this context is applied@ for example@ to the rupture of a pr ocess vessel or pipeline and events that are not predictable. NOTE 6 In any processfacility@ irrespective of size@ there may be numerous sources of ignition apart from those associated with equipment. Appropriate precautions will be necessary to ensure safety in this context. This standard may be used with judgement for other ignition sources.
ISA 60079-10-1-2014 history
2014ISA 60079-10-1-2014 Explosive Atmospheres – Part 10-1: Classification of areas – Explosive gas atmospheres (12.24.01)