This standard specifies the types, technical requirements, test methods, re-inspection and supply technical conditions of non-alloy steel and fine-grain steel solid filler wire for tungsten inert gas shielded arc welding. This standard is applicable to non-alloy steel and fine-grain steel solid filler wire (hereinafter referred to as "welding wire") for tungsten inert gas arc welding whose minimum tensile strength requirement value of the deposited metal is not greater than 570 MPa.
GB/T 39280-2020 Referenced Document
GB/T 18591 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
GB/T 25774.1 Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals*, 2023-11-27 Update
GB/T 25775 Technical delivery conditions for welding consumables.Type of product,dimensions,tolerances and markings
GB/T 25778 Procurement guidelines for welding consumables
GB/T 2650 Destructive tests on welds in metallic materials—Impact tests*, 2022-10-12 Update
GB/T 2652 Destructive tests on welds in metallic materials—Longitudinal tensile test on weld metal in fusion welded joints*, 2022-10-12 Update
GB/T 3323.1 Non-destructive testing of welds—Radiographic testing—Part 1:X- and gamma-ray techniques with film
GB/T 37910.1-2019 Non-destructive testing of welds—Acceptance levels for radiographic testing—Part 1:Steel,nickel,titanium and their alloys
GB/T 39255-2020 Gases and gas mixtures for welding and cutting processes
ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 544:2003 Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings
GB/T 39280-2020 history
2020GB/T 39280-2020 Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels