ASTM G170-06(2020)e1
Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

Standard No.

ASTM G170-06(2020)e1

Release Date

2020

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM G170-06(2020)e1

Scope

1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow conditions. 1.2 This guide does not cover detailed calculations and methods, but rather covers a range of approaches which have found application in inhibitor evaluation. 1.3 Only those methodologies that have found wide acceptance in inhibitor evaluation are considered in this guide. 1.4 This guide is intended to assist in the selection of methodologies that can be used for evaluating corrosion inhibitors. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM G170-06(2020)e1 Referenced Document

• ASTM D1141 Standard Practice for the Preparation of Substitute Ocean Water
• ASTM D4410 Terminology for Fluvial Sediment
• ASTM G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
• ASTM G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
• ASTM G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements*， 2023-06-01 Update
• ASTM G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
• ASTM G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
• ASTM G193 Standard Terminology and Acronyms Relating to Corrosion*， 2022-08-01 Update
• ASTM G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
• ASTM G31 Standard Practice for Laboratory Immersion Corrosion Testing of Metals
• ASTM G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
• ASTM G5 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
• ASTM G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
• ASTM G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
• ISO 6614 Petroleum products — Determination of water separability of petroleum oils and synthetic fluids — Amendment 1
• ISO 696 Surface active agents; Measurement of foaming power; Modified Ross-Miles method

ASTM G170-06(2020)e1 history

• 2020 ASTM G170-06(2020)e1 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
• 2006 ASTM G170-06(2012) Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
• 2006 ASTM G170-06 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
• 2001 ASTM G170-01a Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
• 2001 ASTM G170-01 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory