IEEE C37.63-2005
Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for AC Systems

Standard No.

IEEE C37.63-2005

Release Date

2005

Published By

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

Status

Be replaced 2013-05

Replace By

IEEE C37.63-2013

Latest

IEEE C37.63-2013

Scope

This standard applies to all overhead@ pad-mounted@ dry-vault@ and submersible single-pole or multipole alternating-current automatic line sectionalizers for rated maximum voltages from 1000 V to 38 000 V. Voltages above 38 000 V shall be considered special applications. In order to simplify the terminology in this standard@ the term sectionalizer has been substituted for automatic line sectionalizer wherever possible. Purpose The purpose of this standard is to describe the requirements for sectionalizers. Qualification to this standard should give reasonable assurance to the user that equipment meeting the requirements of this standard will perform in a satisfactory manner@ provided that it has been properly selected for the intended application and is installed in accordance with the manufacturer??s recommendations.

IEEE C37.63-2005 history

• 2013 IEEE C37.63-2013 Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
• 2005 IEEE C37.63-2005 Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for AC Systems
• 1997 IEEE C37.63-1997 Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for AC Systems (Revision of ANSI/IEEE C37.63-1984)
• 1984 IEEE C37.63-1984 Standard Requirements for Overhead@ Pad-Mounted@ Dry Vault@ and Submersible Automatic Line Sectionalizers for AC Systems