ASTM D4587-11(2019)e1
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- Standard No.
- ASTM D4587-11(2019)e1
- Release Date
- 2019
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D4587-23
- Latest
- ASTM D4587-23
- Scope
- 1.1 This practice covers the selection of test conditions for accelerated exposure testing of coatings and related products in fluorescent UV and condensation devices conducted according to Practices G151 and G154. This practice also covers the preparation of test specimens, and the evaluation of test results. Table 1 describes commonly used test conditions. NOTE 1—Previous versions of this practice referenced fluorescent UV devices described by Practice G53, which described very specific equipment designs. Practice G53 has been withdrawn and replaced by Practice G151, which describes performance criteria for all exposure devices that use laboratory light sources, and by Practice G154, which gives requirements for exposing nonmetallic materials in fluorescent UV devices. NOTE 2—ISO 11507:1997 also describes fluorescent UV-condensation exposures of paints and coatings. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D4587-11(2019)e1 Referenced Document
- ASTM D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers*， 2020-06-01 Update
- ASTM D1186 Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
- ASTM D1400 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
- ASTM D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
- ASTM D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
- ASTM D2244 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
- ASTM D2616 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
- ASTM D3359 Standard Test Methods for Measuring Adhesion by Tape Test
- ASTM D358 Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings
- ASTM D3980 Standard Practice for Interlaboratory Testing of Paint and Related Materials
- ASTM D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
- ASTM D523 Standard Test Method for Specular Gloss
- ASTM D5870 Standard Practice for Calculating Property Retention Index of Plastics
- ASTM D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products*， 2022-06-01 Update
- ASTM D610 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D659 Method of Evaluating Degree of Chalking of Exterior Paints
- ASTM D660 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
- ASTM D662 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
- ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints
- ASTM D772 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
- ASTM D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
- ASTM E1347 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
- ASTM G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
- ASTM G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
- ASTM G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials*， 2023-01-01 Update
- ASTM G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests*， 2024-04-21 Update
- ASTM G53 Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials
- SAE J2020 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
ASTM D4587-11(2019)e1 history
- 2023 ASTM D4587-23 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- 2019 ASTM D4587-11(2019)e1 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- 2011 ASTM D4587-11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- 2005 ASTM D4587-05 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- 2001 ASTM D4587-01 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- 1991 ASTM D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
