1 Scope
This document establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber products in defined
climatic exposure conditions, and specifies performance requirements for such adhesives
for the factory manufacture or factory-like manufacturing conditions of load-bearing
timber products only.
This document only specifies the performance of an adhesive for use in an environment
corresponding to the defined conditions.
The performance requirements of this document are applicable to the adhesive only,
not to the manufacturing timber products. This document does not cover the performance
of adhesives for on-site gluing (except for factory-like conditions) or the production
of wood-based panels, except solid wood panels, or modified and stabilized wood with
considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat
treated wood and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use
in timber products bonded with adhesives, to assess or control the quality of adhesives.
The requirements are applicable to the type testing of the adhesives. Production control
activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing
timber products, provided that the bonding process has been carried out according
to an appropriate product standard.
BS EN 301:2023 Referenced Document
EN 12092 Adhesives - Determination of viscosity*, 2024-04-21 Update
EN 13183-2 Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method
EN 13183-3 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
EN 302-1 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
EN 302-2 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
EN 302-3 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 302-4 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
EN 302-8 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear*, 2023-04-26 Update
EN 408 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties