ASTM D800-05(2014)
Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

Standard No.

ASTM D800-05(2014)

Release Date

2014

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D800-05(2014)

Scope

1.1 These test methods describe the procedures for the chemical analysis of industrial metal cleaning compositions in solid, paste, or liquid form. These cleaning compositions may contain caustic alkalies, silicates, phosphates, chromates, carbonates, bicarbonates, borates, sulfates, sulfites, nitrates, chlorides, soaps, rosin, sulfonated wetting agents, anti-foaming agents, organic bases, organic solvents, organic coupling agents, and sometimes inorganic acid salts or organic acids. Occasionally, such cleaning compositions may contain sulfonated oils; in such cases, reference should be made to Method D500. The examination under a low power microscope or magnifying glass, supplemented by a few qualitative tests, will often indicate the number of components and their identity. 1.2 The analytical methods appear in the following order: Section Preparation of Sample 4 Total Alkalinity as Na2O 5 – 8 Total Fatty Acids (and Rosin) 9 and 10 Na2O Combined with Fatty Acids (and Rosin) 11 and 12 Anhydrous Soap 13 —Rosin (McNicoll Test Method): Qualitative 14 and 15 Quantitative 16 – 19 Total Silica Calculated as SiO2 20 – 23 Phosphates: Qualitative 24 and 25 Quantitative 26 – 18 Combined Sodium and Potassium Oxides 34 – 37 Chlorides 38 – 40 Sulfates 41 – 43 Water, Distillation Test Method 44 – 47 Carbon Dioxide by Evolution-Absorption Test Method 48 – 52 Loss at 105°C 53 and 54 Total Matter Insoluble in Alcohol 55 – 57 Free Alkali 58 – 60 Synthetic Detergent or Wetting Agent 61 and 62 Volatile Hydrocarbons 63 – 67 Loss on Ignition 68 and 69 Report 70 and 71 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Material Safety Data Sheets are available for reagents and materials. Review them for hazards prior to usage. See 6.1 for a specific hazards statement.

ASTM D800-05(2014) Referenced Document

• ASTM D1193 Standard Specification for Reagent Water
• ASTM D500 Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils*， 2023-07-01 Update
• ASTM D841 Standard Specification for Nitration Grade Toluene
• ASTM D843 Standard Specification for Nitration Grade Xylene

ASTM D800-05(2014) history

• 2014 ASTM D800-05(2014) Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
• 2005 ASTM D800-05 Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
• 1991 ASTM D800-91(1997) Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions