SAE AS6171/6-2016
Techniques for Suspect/Counterfeit EEE Parts Detection by Acoustic Microscopy (AM) Test Methods
- Standard No.
- SAE AS6171/6-2016
- Release Date
- 2016
- Published By
- SAE - SAE International
- Latest
- SAE AS6171/6-2016
- Scope
- Through the use of ultra-high frequency ultrasound@ typically above 10 MHz@ Acoustic Microscopy (AM) non-destructively finds and characterizes physical features and latent defects (visualization of interior features in a layer by layer process) - such as material continuity and discontinuities@ sub-surface flaws@ cracks@ voids@ delaminations and porosity. AM observed features and defects can be indicators that the components were improperly handled@ stored@ altered or previously used. If AS6171/6 is invoked in the contract@ the base document@ AS6171 General Requirements shall also apply. Purpose The purpose of this document is to provide recommended techniques and guidelines for the use of Acoustic Microscopy for detection of counterfeit electronic components
SAE AS6171/6-2016 history
- 2016 SAE AS6171/6-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Acoustic Microscopy (AM) Test Methods
SAE AS6171/6-2016 -All Parts
SAE AS6171-2018 Test Methods Standard; General Requirements@ Suspect/Counterfeit@ Electrical@ Electronic@ and Electromechanical Parts
SAE AS6171/1-2016 Suspect/Counterfeit Test Evaluation Method
SAE AS6171/10-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Thermogravimetric Analysis (TGA) Test Methods
SAE AS6171/11-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Design Recovery Test Methods
SAE AS6171/2-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection@ Remarking and Resurfacing@ and Surface Texture Analysis Test Methods
SAE AS6171/2A-2017 Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection@ Remarking and Resurfacing@ and Surface Texture Analysis Test Methods
SAE AS6171/3-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by X-Ray Fluorescence Test Methods
SAE AS6171/4-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Delid/Decapsulation Physical Analysis Test Methods
SAE AS6171/5-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Radiological Test Methods
SAE AS6171/6-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Acoustic Microscopy (AM) Test Methods
SAE AS6171/7-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Electrical Test Methods
SAE AS6171/8-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Raman Spectroscopy Test Methods
SAE AS6171/9-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods
SAE AS6171A-2018 Test Methods Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts