1 Scope
This document defines the dimensions and specifies the performance and safety requirements
for traction aid winches used in forestry for assisting supported machines while going uphill and downhill ( pulling and braking).
This document is applicable to fixed and detachable winches and their components,
connections and communications, which are used with mobile and self-propelled forestry
machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine . In addition, this document defines requirements for the assembly of supported machine and traction aid winch . It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on
cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be
applied to traction aid systems used on machines where, without use of these systems, the machine remains
stationary on slopes under its independent control (see Annex E).
Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements...
BS EN ISO 19472-2:2022 Referenced Document
EN 13411-8:2011 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging
EN 17067:2018 Forestry machinery - Safety requirements on radio remote controls
EN 60204-1:2018 AMD 1 Electrical Equipment of Industrial Machines - Part 1: General Requirements;
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
ISO 10968:2020 Earth-moving machinery — Operator's controls
ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
ISO 11850:2011 Machinery for forestry - General safety requirements
ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
ISO 12508:1994 Earth-moving machinery - Operator station and maintenance areas - Bluntness of edges
ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design
ISO 13857:2019 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 15077:2020 Tractors and self-propelled machinery for agriculture — Operator controls — Actuating forces, displacement, location and method of operation
ISO 15817:2012 Earth-moving machinery - Safety requirements for remote operator control systems
ISO 15818:2017 Earth-moving machinery - Lifting and tying-down attachment points - Performance requirements
ISO 16625:2013 Cranes and hoists - Selection of wire ropes, drums and sheaves
ISO 20474-1:2017 Earth-moving machinery - Safety - Part 1: General requirements
ISO 2867:2011 Earth-moving machinery - Access systems
ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format
ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 4254-1:2013 Agricultural machinery-Safety-Part 1:General requirements.*, 2024-04-21 Update
ISO 4309:2017 Cranes - Wire ropes - Care and maintenance, inspection and discard
ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components
ISO 4871:1996 Acoustics - Declaration and verification of noise emission values of machinery and equipment
ISO 6750-1:2019 Earth-moving machinery — Operator's manual — Part 1: Contents and format
ISO 8084:2003 Machinery for forestry - Operator protective structures - Laboratory tests and performance requirements