These requirements cover factory-built chimneys intended for venting gas@ liquid@ and solid-fuel fired residential-type appliances and building heating appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000??(538??. Factory-built chimneys are intended for installation in accordance with the Standard for Chimneys@ Fireplaces@ Vents@ and Solid-Fuel Burning Appliances@ NFPA 211@ and in accordance with codes such as the International Mechanical Code@ the International Residential Code@ and the Uniform Mechanical Code. They are intended for installation inside or outside of buildings or both@ in a manner that provides a vertical (30 degree maximum offset) conduit or passageway to transport flue gases to the outside. The chimneys covered by these requirements comply with either a limited duration 1700??(927?? flue-gas temperature test or a limited duration 2100??(1149?? flue-gas temperature test@ at the manufacturer??s option. These requirements cover dual purpose residential type and building heating appliance type chimneys@ and single purpose building heating appliance type chimneys. Dual purpose residential type and building heating appliance type chimneys are tested enclosed and intended to be installed unenclosed or enclosed with combustible construction. Single purpose building heating appliance type chimneys are tested unenclosed and intended to be installed unenclosed or enclosed in a noncombustible chase.
UL 103 BULLETIN-2007 history
1970UL 103-2021 Chimneys, factory-built, residential type and building heating appliance
2016UL 103 BULLETIN-2016 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: JANUARY 23@ 2017)
2015UL 103 BULLETIN-2015 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: May@ 25@ 2015)
2014UL 103 BULLETIN-2014 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: MARCH 26@ 2014)
2013UL 103 CRD-2013 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances - Section/Paragraph Reference: Supplement SA Subject: REQUIREMENTS FOR CHIMNEY CONNECTORS FOR SOLID FUEL FIRED ROOM HEATERS AND FIREPLACE STOVES (Edition 11
2013UL 103 BULLETIN-2013 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: August 09@ 2013)
2012UL 103 BULLETIN-2012 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: MAY 21@ 2012)
2011UL 103 BULLETIN-2011 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: DECEMBER 28@ 2011)
2010UL 103 BULLETIN-2010 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: MAY 28@ 2010)
2010UL 103-2010 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (Eleventh Edition; Reprint with revisions through and including July 27@ 2012)
2009UL 103 BULLETIN-2009 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (COMMENTS DUE: May 06@ 2009)
2007UL 103 BULLETIN-2007 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances
2001UL 103-2001 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (Tenth Edition; Reprint with Revisions Through and Including June 30@ 2006)
2000UL 103 BULLETIN-2000 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances
1995UL 103-1995 UL Standard for Safety Factory-Built Chimneys for Residential Type and Building Heating Appliances (Ninth Edition; Reprint with Revisions Through and Including March 17@ 1999)
1994UL 103-1994 Chimneys, factory-built, residential type and building heating appliance