SAE AMS3329C-2017
Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, High Strength, 45-55

Standard No.

SAE AMS3329C-2017

Release Date

2017

Published By

SAE - SAE International

Status

Be replaced

Replace By

SAE AMS3329D-2023

Latest

SAE AMS3329D-2023

Scope

Form This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet@ strip@ tubing@ extrusions@ and molded shapes. This specification should not be used for molded rings@ compression seals@ Oring cord@ and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material. Application This Material Type has resistance to jet fuel and lubricating oils@ but usage is not limited to such applications. This Material Type has a typical service temperature range of -76 to +302 ??(-60 to +150 ??. The service temperature range of the material is a general temperature range@ but the presence of particular fluids and specific design requirements may modify this range. Each application should be considered separately. It is the responsibility of the user to determine that this specification is appropriate for the environments [temperature range@ fluids exposure@ etc.] in which it is sought to be used. Order of Precedence This specification is in addition to and in no way limiting@ superseding@ or abrogating any contractual obligation as required by the applicable procurement document. In the event of conflict in requirements@ the order of precedence shall be: 1. Procurement Document or Contractual Agreement and all statutory and regulatory requirements (excluding this document) 2. Applicable purchaser??s drawing and/or design data 3. Specifications referenced on the drawing 4. This document 5. All specifications referenced in this document Safety-Hazardous Materials While the materials@ methods@ applications@ and processes described or referenced in this specification may involve the use of hazardous materials@ this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.

SAE AMS3329C-2017 history

• 2023 SAE AMS3329D-2023 Elastomer: Fluorosilicone Rubber (FVMQ), Fuel and Oil Resistant, High Strength, 45 – 55 Shore A Hardness, For Products in Fuel Systems / Lubricating Oils
• 2017 SAE AMS3329C-2017 Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, High Strength, 45-55
• 2011 SAE AMS3329-2011 FLUOROSILICONE (FVMQ) RUBBER Fuel and Oil Resistant, High Strength 45 - 55
• 2010 SAE AMS3329B-2010 Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45 - 55
• 2001 SAE AMS3329A-2001 Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45 - 55
• 1994 SAE AMS3329A-1994 Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, High Strength, 45-55