1.1 This specification2 covers asphalt binders graded by performance. Grading designations are related to the LTPPBind Online calculated maximum pavement design temperature, the minimum pavement design temperature, and the traffic loading. NOTE 1—For more information on LTPPBind Online, see https:// infopave.fhwa.dot.gov/Tools/LTPPBindOnline accessed May 23, 2023.
1.2 This specification incorporates Test Method D7405 for determining non-recoverable creep compliance, Jnr. “S,” “H,” “V,” or “E” designations must be specified for standard, heavy, very heavy, and extremely heavy traffic loading, respectively.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. NOTE 2—A guidance document for specifying bodies using R % for elastic properties is under development. NOTE 3—For asphalt binders graded by penetration at 25 °C, see Specification D946/D946M. For asphalt binders graded by viscosity at 60 °C, see Specification D3381/D3381M. For performance-graded asphalt binder, see Specification D6373. NOTE 4—AASHTO R 29 provides non-mandatory information for determining the performance grade of an asphalt binder.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D8239-23 Referenced Document
ASTM D140/D140M Standard Practice for Sampling Asphalt Materials*, 2023-12-01 Update
ASTM D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction
ASTM D4402/D4402M Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D6373 Standard Specification for Performance Graded Asphalt Binder
ASTM D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
ASTM D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)*, 2024-04-21 Update
ASTM D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)*, 2024-04-21 Update
ASTM D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer*, 2024-01-25 Update
ASTM D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D8 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D946/D946M Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D8239-23 history
2023ASTM D8239-23 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
2021ASTM D8239-21a Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
2021ASTM D8239-21 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
2018ASTM D8239-18 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test