SAE AMS4128D-2013
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

Standard No.

SAE AMS4128D-2013

Release Date

2013

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS4128E-2021

Latest

SAE AMS4128E-2021

Scope

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50 mm) and over in nominal diameter or least difference between parallel sides.

SAE AMS4128D-2013 history

• 2021 SAE AMS4128E-2021 Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching (UNS A96061)
• 2013 SAE AMS4128D-2013 Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
• 2007 SAE AMS4128D-2007 Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching UNS A96061
• 2001 SAE AMS4128C-2001 Aluminum Alloy, Bars, Rolled or Cold Finished 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
• 1995 SAE AMS4128B-1995 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
• 1986 SAE AMS4128B-1986 Aluminum Alloy Bars@ Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061- T451) Solution Heat Treated and Stress Relieved by Stretching
• 1979 SAE AMS4128A-1979 ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Stress Relief Stretched
• 1969 SAE AMS4128-1969 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Stress Relief Stretched