ASTM C1405-22
Standard Specification for Glazed Brick (Single Fired, Brick Units)

Standard No.

ASTM C1405-22

Release Date

2022

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM C1405-23

Latest

ASTM C1405-23

Scope

1.1 This specification covers brick, having a ceramic glaze finish fused to the body during the same process as the unit body firing, that are intended for use in masonry and supplying structural or facing components, or both, to the structure. This specification does not cover double-fired glazed brick. Some double-fired decorative glazes have physical properties, which vary from those of single-fired glazes due to the lower temperatures used in applying the decorative coating. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of brick extracted from masonry structures for determining conformance or nonconformance to the property requirements of this specification is beyond the scope of this specification. 1.3 Glazed brick are prismatic units available in a variety of sizes, textures, colors, and shapes. Glazed brick are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment shall develop a fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see Terminology C1232). 1.4 Glazed brick are shaped during manufacture by molding, pressing, or extrusion, and the shaping method is a way to describe the brick. 1.5 Glazed brick are classified into one of two grades, one of two types, one of two classes, and one of three divisions. 1.6 Opacity of the glaze is not required unless specified by the purchaser. 1.7 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C1405-22 Referenced Document

• ASTM C1232 Standard Terminology for Masonry*， 2023-12-15 Update
• ASTM C1895 Standard Test Method for Determination of Mohs Scratch Hardness
• ASTM C67/C67M Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile*， 2023-06-01 Update
• ASTM E2105 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)*， 2024-04-21 Update
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials

ASTM C1405-22 history

• 2023 ASTM C1405-23 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2022 ASTM C1405-22 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2020 ASTM C1405-20a Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2020 ASTM C1405-20 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2019 ASTM C1405-19 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2016 ASTM C1405-16 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2015 ASTM C1405-15 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2014 ASTM C1405-14 Standard Specification for Glazed Brick 40;Single Fired, Brick Units41;
• 2012 ASTM C1405-12 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2010 ASTM C1405-10 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2008 ASTM C1405-08 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2007 ASTM C1405-07 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2005 ASTM C1405-05a Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2005 ASTM C1405-05 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• 2004 ASTM C1405-04 Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
• 2002 ASTM C1405-02 Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
• 2001 ASTM C1405-01b Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
• 2001 ASTM C1405-01a Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
• 2001 ASTM C1405-01 Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)
• 2000 ASTM C1405-00a Standard Specification for Glazed Brick (Single Fired, Solid Brick Units)