1 Scope
This part of IEC 61400‑12 specifies a procedure for measuring the nacelle transfer function of a single electricity-producing, horizontal axis wind turbine,
which is not considered to be a small wind turbine in accordance with IEC 61400‑2. It is expected that this document be used when a valid nacelle transfer function is needed to execute a power performance measurement according
to IEC 61400‑12‑2.
A wind speed measured on the nacelle or hub of a wind turbine is affected by the turbine rotor (i.e. speeded up or slowed
down wind speed). In IEC 61400‑12‑1, an anemometer is located on a meteorological tower that is located between two and
four rotor diameters upwind of the test turbine. This location allows direct measurement
of the "free" wind with minimum interference from the test turbine's rotor. In the
procedure of this document, the anemometer is located on or near the test turbine's
nacelle . In this location, the anemometer is measuring a wind speed that is strongly affected
by the test turbine's rotor and the nacelle . The procedure in this document includes methods for determining and applying appropriate
corrections for this interference. However, note that these corrections inherently
increase the measurement uncertainty compared to a properly configured test conducted in accordance with IEC 61400‑12‑1.
This document specifies how to characterise a wind turbine's nacelle transfer function. The nacelle transfer function is determined by collecting simultaneous measurements of nace...
BS EN IEC 61400-12-6:2022 Referenced Document
IEC 60688 Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals
IEC 61400-12-1 Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines
IEC 61400-12-2:2022 Wind energy generation systems - Part 12-2: Power performance of electricity producing wind turbines based on nacelle anemometry
IEC 61400-12-3 Wind energy generation systems - Part 12-3: Power performance - Measurement based site calibration
IEC 61400-12-5:2022 Wind energy generation systems - Part 12-5: Power performance - Assessment of obstacles and terrain
IEC 61400-50-1 Wind energy generation systems - Part 50-1: Wind measurement - Application of meteorological mast, nacelle and spinner mounted instruments*, 2022-11-16 Update
ISO/IEC GUIDE 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
BS EN IEC 61400-12-6:2022 history
2022BS EN IEC 61400-12-6:2022 Wind energy generation systems - Measurement based nacelle transfer function of electricity producing wind turbines