UL 121201-2017
UL Standard for Safety Nonincendive Electrical Equipment for Use in Class I and II@ Division 2 and Class III@ Divisions 1 and 2 Hazardous (Classified) Locations (Ninth Edition; Reprint with Revisions Through and Including August 31@ 2018)

Standard No.
UL 121201-2017
Release Date
2017
Published By
Underwriters Laboratories (UL)
Status
 2017-09
Replace By
UL 121201 BULLETIN-2017
Latest
UL 121201-2021
Scope
Introduction The purpose of this standard is to provide minimum requirements for the design@ construction@ and marking of electrical equipment or parts of such equipment for use in Class I and Class II@ Division 2 and Class III@ Divisions 1 and 2 hazardous (classified) locations. This equipment@ in normal operation@ is not capable of causing ignition of the surrounding atmosphere under the conditions prescribed in this standard@ although the equipment may contain electronic components used in an incendive circuit and may also have field wiring that is an incendive circuit. In addition@ it is the intent of this document to establish uniformity in test methods for determining the suitability of the equipment and associated circuits and components as they relate to potential ignition of a specific flammable gas or vapour-in-air mixture@ combustible dust@ easily ignitible fibers@ or flyings.

UL 121201-2017 history

  • 1970 UL 121201-2021 UL Standard for Safety Nonincendive Electrical Equipment for Use in Class I and II Division 2 and Class III Divisions 1 and 2 Hazardous (Classified) Locations
  • 2019 UL 121201 BULLETIN-2019 UL Standard for Safety Nonincendive Electrical Equipment for Use in Class I and II@ Division 2 and Class III@ Divisions 1 and 2 Hazardous (Classified) Locations (COMMENTS DUE: APRIL 22@ 2019)
  • 2017 UL 121201 BULLETIN-2017 UL Standard for Safety Nonincendive Electrical Equipment for Use in Class I and II@ Division 2 and Class III@ Divisions 1 and 2 Hazardous (Classified) Locations (COMMENTS DUE: JULY 24@ 2017)
  • 2017 UL 121201-2017 UL Standard for Safety Nonincendive Electrical Equipment for Use in Class I and II@ Division 2 and Class III@ Divisions 1 and 2 Hazardous (Classified) Locations (Ninth Edition; Reprint with Revisions Through and Including August 31@ 2018)
  • 2016 UL 121201 BULLETIN-2016 UL Standard for Safety Nonincendive Electrical Equipment for Use in Class I and II@ Division 2 and Class III@ Divisions 1 and 2 Hazardous (Classified) Locations (COMMENTS DUE: JANUARY 9@ 2017)



Copyright ©2024 All Rights Reserved