ASTM E2067-22
Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- Standard No.
- ASTM E2067-22
- Release Date
- 2022
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM E2067-23
- Latest
- ASTM E2067-23
- Scope
- 1.1 This practice deals with methods to construct, calibrate, and use full scale oxygen consumption calorimeters to help minimize testing result discrepancies between laboratories. 1.2 The methodology described herein is used in a number of ASTM test methods, in a variety of unstandardized test methods, and for research purposes. This practice will facilitate coordination of generic requirements, which are not specific to the item under test. 1.3 The principal fire-test-response characteristics obtained from the test methods using this technique are those associated with heat release from the specimens tested, as a function of time. Other fire-test-response characteristics also are determined. 1.4 This practice is intended to apply to the conduction of different types of tests, including both some in which the objective is to assess the comparative fire performance of products releasing low amounts of heat or smoke and some in which the objective is to assess whether flashover will occur. 1.5 This practice does not provide pass/fail criteria that can be used as a regulatory tool, nor does it describe a test method for any material or product. 1.6 For use of the SI system of units in referee decisions, see IEEE/ASTM SI-10. The units given in parentheses are provided for information only. 1.7 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. NOTE 1—This is the standard caveat described in section F2.2.2.1 of the Form and Style for ASTM Standards manual for fire-test-response standards. In actual fact, this practice does not provide quantitative measures. 1.8 Fire testing of products and materials is inherently hazardous, and adequate safeguards for personnel and property shall be employed in conducting these tests. Fire testing involves hazardous materials, operations, and equipment. See also Section 7. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E2067-22 Referenced Document
- ASTM D5424 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
- ASTM D5537 Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
- ASTM D6113 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
- ASTM E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
- ASTM E1474 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
- ASTM E1537 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
- ASTM E1590 Standard Test Method for Fire Testing of Mattresses
- ASTM E1623 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)*， 2022-11-01 Update
- ASTM E1740 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
- ASTM E176 Standard Terminology of Fire Standards
- ASTM E1822 Standard Test Method for Fire Testing of Stacked Chairs
- ASTM E2965 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter*， 2022-11-01 Update
- ASTM E603 Standard Guide for Room Fire Experiments
- ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM E906 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products
- IEEE/ASTM SI 10 American National Standard for Metric Practice
- ISO 13943 Fire safety — Vocabulary*， 2023-09-01 Update
- ISO 5660-1 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) AMENDMENT 1
- ISO 9705 Fire tests; full-scale room test for surface products; technical corrigendum 1
ASTM E2067-22 history
- 2023 ASTM E2067-23 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2022 ASTM E2067-22 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2020 ASTM E2067-20 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2015 ASTM E2067-15 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2012 ASTM E2067-12 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2008 ASTM E2067-08 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2003 ASTM E2067-03 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2002 ASTM E2067-02 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
- 2000 ASTM E2067-00a Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
