M 85-2012
Standard Specification for Portland Cement

Standard No.

M 85-2012

Release Date

2012

Published By

AASHTO - American Association of State Highway and Transportation Officials

Status

Be replaced 2016-05

Replace By

M 85-2015

Latest

M 85-2019

Scope

This specification covers ten types of portland cement as follows (Note 1): Type I - For use when the special properties specified for any other type are not required; Type IA - Air-entraining cement for the same uses as Type I@ where air-entrainment is desired; Type II - For general use@ more especially when moderate sulfate resistance is desired; Type IIA - Air-entraining cement for the same uses as Type II@ where air-entrainment is desired; Type II (MH) - For general use@ more especially when moderate heat of hydration and moderate sulfate resistance are desired. Type II (MH)A - Air-entraining cement for the same uses as Type II(MH)@ where air-entrainment is desired. Type III - For use when high early strength is desired; Type IIIA - Air-entraining cement for the same use as Type III@ where air-entrainment is desired; Type IV - For use when low heat of hydration is desired; and Type V - For use when high sulfate resistance is desired. Note 1 - Some cements are designated with a combined type classification@ such as Type I/II@ indicating that the cement meets the requirements of the indicated types and is being offered as suitable for use when either type is desired. When both SI and inch-pound units are present@ the SI units are the standard. The inch-pound units are approximations listed for information only. The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

M 85-2012 history

• 2019 M 85-2019 Standard Specification for Portland Cement
• 2018 M 85-2018 Standard Specification for Portland Cement
• 2017 M 85-2017 Standard Specification for Portland Cement
• 2016 M 85-2016 Standard Specification for Portland Cement
• 2015 M 85-2015 Standard Specification for Portland Cement
• 2012 M 85-2012 Standard Specification for Portland Cement
• 2011 M 85-2011 Standard Specification for Portland Cement
• 2009 M 85-2009 Standard Specification for Portland Cement
• 2008 M 85-2008 Standard Specification for Portland Cement
• 2007 M 85-2007 Standard Specification for Portland Cement
• 2006 M 85-2006 Standard Specification for Portland Cement (ASTM Designation: C 150-04a)
• 2004 M 85-2004 Standard Specification for Portland Cement (ASTM Designation: C 150-02a)
• 2003 M 85-2003 Standard Specification for Portland Cement (ASTM Designation: C 150-02)
• 2002 M 85-2002 Standard Specification for Portland Cement (HM-22; PART IA; ASTM Designation: C 150-00)
• 2000 M 85-2000 Standard Specification for Portland Cement (Twentieth Edition; ASTM C150-98)
• 1998 M 85-1998 Standard Specification for Portland Cement (Eighteenth Edition; ASTM C150-97)
• 1996 M 85-1996 Standard Specification for Portland Cement (Eighteenth Edition; ASTM C150-94b)
• 1993 M 85-1993 Standard Specification for Portland Cement (ASTM C150-92)