1.1 This specification covers single-cell precast conventionally reinforced concrete three-sided structures intended to be used for the construction of culverts and for the conveyance of storm water.
1.2 This specification is the metric counterpart of Specification C1504; therefore, no imperial (metric) equivalents are presented in this specification. NOTE 1—This specification is primarily a manufacturing and purchasing specification. The successful performance of this product depends upon the proper selection of the geometric section, bedding, backfill, and care that the installation conforms to the construction specifications. The purchaser of the precast reinforced concrete three-sided structure specified herein is cautioned that proper correlation of the loading conditions and the field requirements with the geometric section specified and provisions for inspection at the construction site are required.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C1504M-20 Referenced Document
ASTM A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete*, 2022-11-01 Update
ASTM A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement*, 2022-07-01 Update
ASTM A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement*, 2022-12-01 Update
ASTM C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
ASTM C1116/C1116M Standard Specification for Fiber-Reinforced Concrete*, 2023-08-01 Update
ASTM C150/C150M Standard Specification for Portland Cement*, 2022-07-01 Update
ASTM C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete*, 2022-06-15 Update
ASTM C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete*, 2024-04-21 Update
ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field*, 2024-04-01 Update
ASTM C33/C33M Standard Specification for Concrete Aggregates*, 2023-08-01 Update
ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C494/C494M Standard Specification for Chemical Admixtures for Concrete
ASTM C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
ASTM C595/C595M Standard Specification for Blended Hydraulic Cements*, 2023-07-15 Update
ASTM C618 Standard Specification for Fly Ash And Raw Or Calcined Natural Pozzolan For Use As A Mineral Admixture In Portland Cement Concrete
ASTM C822 Standard Terminology Relating to Concrete Pipe and Related Products
ASTM C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars*, 2024-02-01 Update
ASTM C1504M-20 history
2020ASTM C1504M-20 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2019ASTM C1504M-19 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2016ASTM C1504M-16 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2015ASTM C1504M-15a Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2015ASTM C1504M-15e1 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2015ASTM C1504M-15 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2014ASTM C1504M-14 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains 40;Metric41;
2013ASTM C1504M-13a Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2013ASTM C1504M-13 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2004ASTM C1504M-04(2010) Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2004ASTM C1504M-04e2 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
2004ASTM C1504M-04e1 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains (Metric)
2004ASTM C1504M-04 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains (Metric)
2003ASTM C1504M-03 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains (Metric)
2002ASTM C1504M-02 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains, and Sewers (Metric)
2001ASTM C1504M-01e1 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains, and Sewers (Metric)
2001ASTM C1504M-01 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains, and Sewers (Metric)