ASTM D6564/D6564M-17
Standard Guide for Field Filtration of Groundwater Samples

Standard No.
ASTM D6564/D6564M-17
Release Date
2017
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D6564/D6564M-17(2024)
Latest
ASTM D6564/D6564M-17(2024)
Scope
1.1 This guide covers methods for field filtration of groundwater samples collected from groundwater monitoring wells, excluding samples that contain non-aqueous phase liquids (either Dense Non-Aqueous Phase Liquids (DNAPLs) or Light Non-Aqueous Phase Liquids (LNAPLs)). Methods of field filtration described herein could also be applied to samples collected from wells used for other purposes. Laboratory filtration methods are not described in this guide. 1.2 This guide provides procedures available for field filtration of groundwater samples. The need for sample filtration for specific analytes should be defined prior to the sampling event and documented in the site-specific sampling and analysis plan in accordance with Guide D5903. The decision should be made on a parameter-specific basis with consideration of the data quality objectives of the sampling program, any applicable regulatory agency guidelines, and analytical method requirements. 1.3 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This guide cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service to be judged, nor should this guide be applied without consideration of the many unique aspects of a project. The word “Standard” in the title of this guide means only that the guide has been approved through the ASTM consensus process. 1.4 Units—The values stated in either SI Units or inchpound units given in brackets are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D6564/D6564M-17 Referenced Document

  • ASTM D5088 Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites
  • ASTM D5092 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
  • ASTM D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
  • ASTM D6089 Standard Guide for Documenting a Ground-Water Sampling Event
  • ASTM D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids

ASTM D6564/D6564M-17 history

Standard Guide for Field Filtration of Groundwater Samples


Copyright ©2024 All Rights Reserved