1 Scope
This document specifies the reference method used for type testing, and in case of
dispute, for determining the flow coefficient of coarse and fine aggregates. Other
methods can be used for other purposes, such as factory production control, provided
that an appropriate working relationship with the reference method has been established.
Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine
aggregate of size up to 2 mm. It does not apply to lightweight aggregates.
NOTE 1 For coarse aggregates between 4 mm and 20 mm, the flow coefficient is linked with
the percentage of crushed or broken surfaces of an aggregate and can therefore be
used in association with the method specified in EN 933‑5. Shape and surface texture characteristics also influence the result.
NOTE 2 Experience of this test has been generally limited to natural aggregates.
Examples of test data sheets are given in informative Annexes A and C.
Annex B (informative) contains precision data.
WARNING The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and
heavy lifts). It does not purport to address all of the safety or environmental problems
associated with its use. It is the responsibility of users of this document to take
appropriate...
BS EN 933-6:2022 Referenced Document
EN 1097-6 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 932-2 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
EN 932-5 Tests for general properties of aggregates - Part 5: Common equipment and calibration
EN 933-2 Tests for Geometrical Properties of Aggregates - Part 2: Determination of Particle Size Distribution - Test Sieves, Nominal Size of Apertures
EN 933-3 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
BS EN 933-6:2022 history
2023BS EN 933-6:2022 Tests for geometrical properties of aggregates. Assessment of surface characteristics. Flow coefficient of aggregates
2014BS EN 933-6:2014 Tests for geometrical properties of aggregates. Assessment of surface characteristics. Flow coefficient of aggregate
2002BS EN 933-6:2001 Tests for geometrical properties of aggregates - Assessment of surface characteristics - Flow coefficient of aggregates