IEC 61400-50-2:2022 is applicable specifically to the use of ground-mounted remote sensing wind measurement instruments, i.e. devices which measure the wind at some location generally above and distant from the location at which the instrument is mounted (e.g. sodars, vertical profiling lidars). This document specifically excludes other types of RSD such as forward facing or scanning lidars. This document specifies the following: a. the procedure and requirements for classifying ground-based RSDs in order to assess the uncertainty pertaining from sensitivity of the RSD response to meteorological conditions that can vary between the RSD calibration place and time and the use case (specific measurement campaign – SMC) place and time; b. the procedures and requirements for calibration of RSDs; c. the assessment of wind speed measurement uncertainty; d. additional checks of the RSD performance and measurement uncertainty during the SMC; e. application of the wind speed uncertainty derived from the RSD calibration and classification to the measurements taken during the SMC (e.g. interpolation of uncertainty or calibration results to different heights); f. requirements for reporting. This first edition of IEC 61400-50-2 is part of a structural revision that cancels and replaces the performance standards IEC 61400-12-1:2017 and IEC 61400-12-2:2013. The structural revision contains no technical changes with respect to IEC 61400-12-1:2017 and IEC 61400-12-2:2013, but the parts that relate to wind measurements, measurement of site calibration and assessment of obstacle and terrain have been extracted into separate standards.
ANSI/ARESCA 61400-50-2:2023 history
1970ANSI/ARESCA 61400-50-2:2023 Wind energy generation systems - Part 50-2: Wind measurement - Application of ground-mounted remote sensing technology