SJ/Z 9132-1987
Tests for flammability of plastic materials used for parts and components in electric devices and equipment (English Version)
- Standard No.
- SJ/Z 9132-1987
- Language
- Chinese, Available in English version
- Published By
- Professional Standard - Electron
- Status
- 2010-02
- Latest
- SJ/Z 9132-1987
- Scope
- 1.1 This technical requirement applies to the flammability test of plastic materials used in parts and components in various electrical devices and equipment, and is used to indicate the suitability of the material for flammability in a specific use. 1.2 The test methods described in this standard use specimens of standard size and only measure and indicate the flammability properties of materials used in various electrical devices and equipment in response to heat and flame under controlled laboratory conditions. . The actual reaction of a material to heat and flame depends on the size and shape of the product and the end use of the material in the product. Other important characteristics evaluated include ease of ignition, burning speed, flame spread, fuel influence, combustion severity and combustion products. But it is not limited to the above. 1.3 The final acceptance of materials depends on the use of the materials in the entire equipment. It should comply with the corresponding standards. A classification of the flammability of a material. May vary depending on the equipment or device involved and the specific use of the material. Material performance levels determined by these methods. They should not be considered to be indicative of their performance for their end use. 1.4 This technical requirement also applies to other non-metallic materials that are considered feasible. 1.5 This technical requirement does not apply to plastic materials used as building structures or surface treatments.
SJ/Z 9132-1987 history
- 1970 SJ/Z 9132-1987 Tests for flammability of plastic materials used for parts and components in electric devices and equipment
