ASTM E1583-21a
Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures

Standard No.

ASTM E1583-21a

Release Date

2021

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM E1583-21a

Scope

1.1 This practice covers the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of laboratories engaged in the determination of lead in paint, or settled dust, or airborne particulates, or soil, or any combination thereof, taken from and around buildings and related structures. 1.2 This practice has been developed consistent with Guides E548 and E994, to supplement ISO/IEC 17025. 1.3 This practice contains notes that are explanatory and are not part of the mandatory requirements of the practice. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E1583-21a Referenced Document

• ASTM D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres*， 2024-04-20 Update
• ASTM D3335 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
• ASTM D4185 Standard Practice for Measurement of Metals in Workplace Atmosphere by Flame Atomic Absorption Spectrophotometry
• ASTM D6785 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
• ASTM D7035 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM D7439 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
• ASTM E1187 
• ASTM E1605 Standard Terminology Relating to Lead in Buildings*， 2022-11-01 Update
• ASTM E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
• ASTM E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
• ASTM E1645 Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
• ASTM E1726 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
• ASTM E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
• ASTM E2708 Standard Terminology for Accreditation and Certification*， 2023-11-01 Update
• ASTM E2913/E2913M Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
• ASTM E2914/E2914M Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
• ASTM E3193 Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS)*， 2023-11-01 Update
• ASTM E3203 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
• ASTM E548 
• ASTM E631 Standard Terminology of Building Constructions
• ASTM E994 Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004)
• ISO 15202-2 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
• ISO 15202-3 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
• ISO 30011 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
• ISO 8518 Workplace air — Determination of particulate lead and lead compounds — Flame and electrothermal atomic absorption spectrometric methods*， 2022-10-11 Update
• ISO 9000 Quality management systems - Fundamentals and vocabulary [French version]
• ISO/IEC 17011 Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies*， 2024-04-20 Update
• ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories [Standard in French]

ASTM E1583-21a history

• 2021 ASTM E1583-21a Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
• 2021 ASTM E1583-21 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
• 2017 ASTM E1583-17 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
• 1993 ASTM E1583-93 Practice for Evaluating Laboratories Engaged in the Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures