ASTM C1410-17
Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- Standard No.
- ASTM C1410-17
- Release Date
- 2017
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM C1410-17(2023)
- Latest
- ASTM C1410-17(2023)
- Scope
- 1.1 This specification covers the type, physical properties, and dimensions of open-cell melamine foam intended for use as thermal and sound-absorbing insulation for temperatures from −40 to +350°F (−40 to +177°C) in industrial environments. 1.2 Some uses of thermal insulation materials covered by this specification are governed by building codes that address fire performance. 1.3 The use of an appropriate vapor retarder is required on cold surface applications where water vapor condense and cause a decrease in thermal performance. Refer to Practice C755 for selection of vapor retarders. Facings shall be agreed upon between the purchaser and the manufacturer or supplier. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C1410-17 Referenced Document
- ASTM C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
- ASTM C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
- ASTM C1363 Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
- ASTM C168 Standard Terminology Relating to Thermal Insulation*， 2022-05-01 Update
- ASTM C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
- ASTM C335 Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation
- ASTM C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- ASTM C390 Standard Criteria for Sampling and Acceptance of Preformed Thermal Insulation Lots
- ASTM C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
- ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C585 Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
- ASTM C755 Standard Practice for Selection of Vapor Retarders for Thermal Insulation
- ASTM D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)
- ASTM D3574 Standard Test Methods for Flexible Cellular Materials8212;Slab, Bonded, and Molded Urethane Foams
- ASTM E176 Standard Terminology of Fire Standards
- ASTM E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics*， 2021-12-15 Update
- ASTM E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests*， 2023-01-01 Update
- ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C1410-17 history
- 2023 ASTM C1410-17(2023) Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2017 ASTM C1410-17 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2014 ASTM C1410-14 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2013 ASTM C1410-13 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2012 ASTM C1410-12 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2010 ASTM C1410-10 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2005 ASTM C1410-05ae1 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 2005 ASTM C1410-05a Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
- 1998 ASTM C1410-98 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
