ASTM C1353/C1353M-20e1
Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser

Standard No.

ASTM C1353/C1353M-20e1

Release Date

2020

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM C1353/C1353M-20e1

Scope

1.1 This test method covers the establishment of an index of abrasion resistance by determination of loss of volume resulting from abrasion of dimension stone as described in Terminology C119 and is based on Guide G195. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Exception—The formula for calculation of the result of this test method relies on the use of SI units; all measurements of weight in this test method shall be recorded in SI units. 1.2.2 Exception—As the equipment used in this test method was designed and initially fabricated using dimensions in inch-pound units, the values of equipment dimensions stated in SI units have been given as exact conversions to the nearest 0.1 mm. 1.3 This test method uses a rotary platform abraser to determine the loss in volume of dimension stone caused by abrasion under controlled conditions. 1.4 This test method is useful in indicating the differences in abrasion resistance between the various dimension stones. This test method provides one element in comparing stones of the same type. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C1353/C1353M-20e1 Referenced Document

• ASTM C119 Standard Terminology Relating to Dimension Stone*， 2023-06-01 Update
• ASTM C121 Standard Test Method for Water Absorption of Slate
• ASTM C1799/C1799M Standard Guide to Dimension Stone Test Specimen Sampling and Preparation*， 2022-05-15 Update
• ASTM C97 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
• ASTM G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser*， 2022-06-01 Update

ASTM C1353/C1353M-20e1 history

• 2020 ASTM C1353/C1353M-20e1 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
• 2020 ASTM C1353/C1353M-20 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
• 2015 ASTM C1353/C1353M-15a Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
• 2015 ASTM C1353/C1353M-15 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
• 2009 ASTM C1353/C1353M-09e1 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser
• 2009 ASTM C1353-09 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser
• 2008 ASTM C1353-08 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
• 2007 ASTM C1353-07 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
• 1998 ASTM C1353-98(2006) Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
• 1998 ASTM C1353-98e1 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
• 1998 ASTM C1353-98 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic