National Aeronautics and Space Administration (NASA)
Replace
NASA UFGS-23 73 00.00 40-2006-04NASA 15725S-2005
Scope
[Section 23 00 00.00 40 HEATING, VENTILATING, AND AIR-CONDITIONING applies
to work specified in this section.]
Submit vibration isolation components.
[Section 26 18 39.00 40 MEDIUM-VOLTAGE MOTOR CONTROLLERS applies to this
section.]
Fabrication Drawings shall be submitted for fans consisting of fabrication
and assembly details to be performed in the factory.
Design Analysis and Calculations shall be submitted for fans indicating the
manufacturer's recommended sound pressure level ratings, self alignment and
thrust load requirements, horsepower ratings, and required system rpm's.
Manufacturer's Standard Color Chart shall indicate the manufacturer's
standard color selections and finishes for fans.
NASA UFGS-23 73 00.00 40-2006 Referenced Document
ABMA 11-1990 Load Ratings and Fatigue Life for Roller Bearings
ABMA 9-1990 Load Ratings and Fatigue Life for Ball Bearings
ASHRAE 51-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating AMCA Standard 210-99; Interpretation IC 51-1999-1: 02/18/2000; Interpretation IC 51-1999-02: 09/12/2000; Addendum A:2001; Errata 01/10/2006; Errata 02/15/2006
ASME B15.1-2000 Safety standard for mechanical power transmission apparatus*, 2024-04-18 Update
ASTM A653/A653M-04a Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process*, 2024-04-18 Update
ASTM D2563-94(2002)e1 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
ASTM D2583-95(2001)e1 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D638-03 Standard Test Method for Tensile Properties of Plastics*, 2024-04-18 Update
ASTM D790-03 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials*, 2024-04-18 Update
ISO 1940-1:2003 Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances