T 315-2005
Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

Standard No.

T 315-2005

Release Date

2005

Published By

AASHTO - American Association of State Highway and Transportation Officials

Status

Be replaced 2008-07

Replace By

T 315-2006

Latest

T/CIET 315-2023

Scope

This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 6 and 88??at an angular frequency of 10 rad/s. This test method is intended for determining the linear viscoelastic properties of asphalt binders as required for specification testing and is not intended as a comprehensive procedure for the full characterization of the viscoelastic properties of asphalt binder.This standard is appropriate for unaged material or material aged in accordance with T 240 and R 28.Particulate material in the asphalt binder is limited to particles with longest dimensions less than 250 ??.This standard may involve hazardous materials@ operations@ and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

T 315-2005 history

• 2023 T/CIET 315-2023 Technical Specifications for Integrated Cooling Systems for Energy Storage Batteries
• 2021 T/SIOT 315-2021 Technical Requirements for Smart and Healthy Elderly Falls Intelligent Monitoring System
• 2012 T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• 2010 T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• 2009 T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• 2008 T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• 2006 T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• 1970 TB/T 315-2005 Ball valves for rolling stock
• 1993 TB/T 315-1993 pull plug door