API BULL 2509C-1967
Volumetric Shrinkage Resulting from Blending Volatile Hydrocarbons with Crude Oils (SECOND EDITION)

Standard No.
API BULL 2509C-1967
Release Date
1967
Published By
API - American Petroleum Institute
Scope
"Introduction and Theory In recent years@ crude oil pipelines have been used for transporting an increasing amount of light products such as butane@ natural gasoline@ and high-gravity produced distillates. Because of the physical nature of the crude oil system and the widely dispersed receipt points of the light components@ such products usually are blended into the crude oil stream. Such blending actually is encouraged to reduce losses by evaporation of the lighter components and to minimize pump suction difficulties. As a part of the conservation effort of the pipeline industry@ the causes of oil losses in transit are being investigated continuously. Such an investigation of the volume loss experienced in systems handling the light components blended into a common crude oil stream indicated that the losses did not result entirely from increased evaporation but were caused partly by a phenomenon associated with the blending of the lighter components and heavier crude oil. That is@ when a lighter product such as butane or natural gasoline is mixed with crude oil@ the resulting volume is less than the sum of the individual component volumes. This loss or shrinkage is only an ""apparent loss"" on a volume basis for there is@ of course@ no loss of weight as a result of the mixing operation. In the blending of petroleum components having different physical properties@ volumetric shrinkage occurs because the components do not form ideal solutions. In an ideal solution@ the total solution volume is equal to the sum of the volumes of the components. In order for a solution to approach ideality@ the molecules of the materials blended together must be similar in size@ shape@ and properties. If the nature of the molecules of the components differs appreciably@ then deviation from ideal behavior may be expected. This deviation may be either positive or negative; that is@ the total volume may increase or decrease when the components are blended. Glasstone 1a states that if a solution of two or more components exhibits positive deviation from Raoult's law@ the observed vapor pressure and volume would be greater than if the components had formed an ideal solution. This he attributes to the mean attractive forces between the molecules in the mixture being smaller than for the constituents separately. Conversely@ if a solution should exhibit negative deviation from Raoult's law@ usually there is a decrease in vapor pressure and volume on mixing. This is attributed to the mean attractive forces between the molecules in the mixture being greater than for the constituents separately. Inasmuch as petroleum components contain molecules of various sizes and weights@ solutions of two separate components are seldom ideal. Consequently@ it is to be expected there may be a change in volume associated with the mixing or blending of petroleum components of varying gravities and molecular structure. All available test data covering blends of lighter and heavier petroleum components (e.g.@ butane with crude oil) indicate that the change in volume is negative in direction resulting in a shrinkage of the total volume. a Referes to REFERENCES ON P.13."



Copyright ©2024 All Rights Reserved